
UNSOLVED
USB hub and Win98SE question
My sons Dell XPS (running Win98SE) only has 2 USB (1.1) ports and he needed another port. So I had a Belkin USB Pocket Hub that I used to use on my laptop (a WIN XP system) that I no longer used so I hooked it up to his PC to give him some extra ports.
This hub has an external power source which I am using.
Day I plugged it the PC was already booted up and the device worked as it should. The next day when my son tried to boot up his PC it hung up at the Dell splash screen and I could see the lights on the hub flickering.
So I unplugged it and rebooted. The reboot was successful and has been everytime since then.
There are no drivers or other software to load for this device, so I have no idea why this isn't working. Anyone have an idea?
This hub has an external power source which I am using.
Day I plugged it the PC was already booted up and the device worked as it should. The next day when my son tried to boot up his PC it hung up at the Dell splash screen and I could see the lights on the hub flickering.
So I unplugged it and rebooted. The reboot was successful and has been everytime since then.
There are no drivers or other software to load for this device, so I have no idea why this isn't working. Anyone have an idea?
Responses (3)
Solutions (0)
Fireberd,
Checking the BIOS is a good suggestion, except I don't seem to remember which key to hold down as I boot it up. I've tried F4 and F8 and I get the option to boot into safe mode or normal mode. (I've been using XP so long I don't recall how Win98 works anymore!!) What am I doing wrong?

fireberd
11 Legend
•
33399 Posts
•
112848 Points
145
0
Posted January 16th, 2005 14:00
The Belkin site only lists the pocket hub as MAC OS 8 and above compatible. However, it should work fine on a Windows machine. The Belkin site lists these as 1.1 USB which also should be Win98SE compatible.
Since it worked at one time and then had a problem booting up, check the BIOS in the machine and if has anything other than the A or C drive in the Boot sequence remove it. Win98 machines did not have the USB in the boot sequence or option to boot from USB (at least all I've seen) but still check the BIOS.
With older non-Windows XP systems not all devices are plug and play or have built in drivers. There are many posts on here about the small USB memory keys and all have to have drivers for any OS except Windows XP. Although the external hub is basically just extending the USB hub, it is a "device".