UNSOLVED

zenonithus

updated

9 years ago

Z

zenonithus

1 Rookie

•

47 Posts

2

6570

June 28th, 2017 03:00

Upgrading the heatsinks on Dell Workstation (T7600) to Noctua = better temps

Hey all,

I just came across this guys video and was really impressed with his solution. The cooling on the dell T7600 workstation and most other models with dual cpu, is lets face it, very bad!

Right now my temps for both xeon cpus are idling at 47-52.

It looks like this guy has replaced the suffocating cover with a mesh to vent the heat better and added two Noctua heatsinks that have two fans each.

Just wondering what anyone elses opinion is of this setup? I wasnt sure if another heatsink could work on a dell station though this guy seems to have proved otherwise.

  • zenonithus

    1 Rookie

    •

    47 Posts

    4754

    0

    Posted June 28th, 2017 04:00

    The heatsinks look like noctua NH-U12P. Not sure if these come in different sizes?

  • 4754

    0

    Posted June 28th, 2017 12:00

    Yes it is ..But the Noctuas NH-U12P  will do the work without removing the side covers.

     Noctuas NH-U12P series has become a benchmark in premium quality quiet cooling. The new NH-U12P SE2 now comes with two NF-P12 fans for further improved performance and adds support for LGA1366, LGA1156, LGA1155, LGA1150, LGA775, AM2, AM2+, AM3, AM3+, FM1, FM2, FM2+ via the latest SecuFirm2 multi-socket mounting system.

    If you are looking for some heatsinks for upgradation you will find at NetGen Computers

  • zenonithus

    1 Rookie

    •

    47 Posts

    4754

    0

    Posted June 29th, 2017 13:00

    What are UL and FCC tests Speedstep?

  • speedstep

    11 Legend

    •

    46969 Posts

    4754

    1

    Posted June 29th, 2017 13:00

    Dell cant do that because UL and FCC tests would fail.

  • zenonithus

    1 Rookie

    •

    47 Posts

    4754

    0

    Posted June 29th, 2017 14:00

    So do you mean in regards to the cover being off? It is a bit extreme. I usually open my cover to vent the warm air out. I still think there needs to be venting holes at the side cover. Maybe I will drill them out :D

  • speedstep

    11 Legend

    •

    46969 Posts

    4754

    1

    Posted June 29th, 2017 14:00

    They are safety standards tests REQUIRED BY LAW.

    http://www.ul.com/


    Independent, not-for-profit product safety testing and certification organization. Testing products for public safety.
    There are other organizations Like this
    VDE, CSA, SEMKO, DEMKO.

    https://www.fcc.gov/general/radio-frequency-safety-0



    The FCC is required by the National Environmental Policy Act of 1969, among other things, to evaluate the effect of emissions from FCC-regulated transmitters on the quality of the human environment.   Several organizations, such as the American National Standards Institute (ANSI), the Institute of Electrical and Electronics Engineers, Inc. (IEEE),and the National Council on Radiation Protection and Measurements (NCRP) have issued recommendations for human exposure to RF electromagnetic fields. 

    Regulations [47 C.F.R. 1.1307(b), 1.1310, 2.1091, 2.1093].  The potential hazards associated with RF electromagnetic fields are discussed in OET Bulletin No. 56, "Questions and Answers About the Biological Effects and Potential Hazards of Radio frequency Electromagnetic Fields."

    https://transition.fcc.gov/Bureaus/Engineering_Technology/Orders/1996/fcc96208.pdf

     

  • cleatus45

    2 Intern

    •

    281 Posts

    4754

    0

    Posted June 30th, 2017 09:00

    the cover off/using a screen may or may not help....

    the case (should be) designed for max air flow to where its needed.  such as in on bottom, over the heat sinks and out the top.

    if you open a case, it *may* kill that airflow that went over the spots it was needed--and your case fan would just blow into open space.

    not saying this is always the case, but a real possibility to think about

  • zenonithus

    1 Rookie

    •

    47 Posts

    4754

    0

    Posted July 1st, 2017 14:00

    That's true. I've also realised room temp plays a huge part so looking to cool down the temps to around 22 degrees. Part of me still thinks to have air blowing on the heatsinks does play part in cooling them so I'm installing a pci dual fan abovethe heatsink to see if it lowers the temps at all.