
UNSOLVED
M
MauriceVan
2 Posts
0
116166
April 29th, 2012 12:00
Renesas USB 3.0 not working
I have Dell XPS 8300 desktop with and attached Western Digital external hard drive which is connected to a USB 3.0 port. I use it for backup and it has been working in the past. Recently though I cannot find the external hard drive in windows unless I plug it into a USB 2.0 port. Device manager shows the Renesas USB 3.0 controller as working properlly. When I plug the hard drive back into the USB 3.0 nothing? What gives?
Responses (7)
Solutions (0)
TexasGreyhounds
3 Posts
1340
0
Posted April 30th, 2012 21:00
Mistake in above.
Second link should be:
www.station-drivers.com/.../renesas.htm
Used to be a great site, beware of pop_unders.
MauriceVan
2 Posts
1340
0
Posted April 30th, 2012 21:00
Thanks TexasGreyhounds. Will look Into it. Plugged my external hard drive into a USB 2.0 for now. I am hoping that Dell will come up with the driver and fireware updates on there web site. then I know that I am installing the correct stuff!
TexasGreyhounds
3 Posts
1340
0
Posted May 4th, 2012 16:00
The driver is for the Renesas chip, not the motherboard. If you download the wrong drive, it won't work. You might try the Dell website. I have a 17R laptop and have used the Intel downloads. I assume that Renesas is the maker of your chipset? Google for "latest Renesas 3.0" and you should find plenty of info.
- I have had the same problem for a couple of months. Lately, it has been connecting for a few minutes and then disconnecting. Today I installed the SES driver that came with the WD hard drive and the WD Smartware software. As soon as I did that the drive was found and it stayed connected.

TexasGreyhounds
3 Posts
1340
0
Posted April 30th, 2012 19:00
http://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=19880
http://www.station-drivers.com/page/nec.htm
Sorry your having such a hard time. Renesas USB 3.0 was not quite ready for prime time, IMHO so try these sites and update your drivers and/or firmware. It is pretty straight forward, won't run if not the correct chip. Current version (drivers) is 2.1.28.1. I bought a new Dell laptop last summer with usb 3.0 and ran into all kinds of difficulties, most have been fixed with driver and firmare updates.
The latter site is in French, but most stuff is bilingual.
This a pretty common topic on the web. Search for Renesas USB 3.00 and you will find lots of help. I did.