
UNSOLVED
reinstall winxp on xps400 won't reboot get black screen
Hello, this is my 2nd hard drive replacement on the xps400. Ran diagnostic test, hard drive passed....Tried to reinstall winxp on a new hard drive, it went through the motions, got to the partion etc and then it would not reboot, I get a black screen. Mind you I had to disconnect my CD drive so it could boot off of my dvd drive in order to get the install to start. Not sure what I am doing wrong. It seems to install windows but it won't boot. Do i need to delete everything and start again. Don't know how to do that. I do have a back up and I need files off of it. But the WD my book is not compatible with my other computer which has windows 7. So I need this old XPS to be operational. Please help if you can. Thanks
Responses (5)
Solutions (0)
My apologies,
I will try to answer your questions. Originally I got the dreaded blue screen.Tried whatever we could nothing worked. My neighbor who is more computer literate than I determine that we should start a new and we happend to have an extra hard drive. So we tried to reinstall the operating system on new drive.
I do not believe we formated the new hard drive. If we did, I don't remember
I only did a diagnostic test on the new hard drive after trying to install windows xp when it would not boot. trying to see if there was a hardware problem
I had a DVD reinstallation OS disk . My computer reads the cd rom drive first and there is no option for it to read from the DVd drive. So we disconnected the cd rom so it could read the DVD drive. Upon our first hardware failure ( errors on hard drive) we disconnected the CD so that the Bios would read the DVD disk 9 this was a separate occation and we got the os working...This time it did it seems to go through the motions of loading window xp and then after it went to a black screen. Don't know what to do.
Do not understand what you mean when you say "You could always install the drive with your files as a secondary drive in the other PC and copy off whatever you need onto the Winn7 boot hard drive in that system."
Any help you could provide I would greatly appreciate. I know I should probably buy a new computer but I feel that the crash was without an error that we could see. Just want to reinstall and take files from backup on WD my book and reinstall. We must be forgetting a step.
Thanks
Soph
Do you remember what the original Blue Screen said?
Was the original Dell hard drive ever replaced or reformatted? If not, you should have PC Restore on that drive. It will reinstall XP in a matter of minutes with all the drivers and software that came on it from Dell. Then all you need do is install the XP Service Packs and all updates. To run PC Restore, reinstall the old hard drive, reboot and quickly press Ctrl-F11 before Windows starts to load. Keep in mind that PC Restore wipes the hard drive so all personal files will be lost forever.
If you didn't format the new hard drive, you can't install Windows on it.
Did you disconnect ALL peripherals, including network connection, leaving only mouse, monitor and keyboard, before trying to install XP?
Are the CD and DVD drives IDE or SATA drives? If they're IDE drives, the DVD drive must be connected at the end of the flat ribbon cable in order for it to run the XP installer. If it's connected to the connector in the middle of the cable, the installer won't work correctly.
When it won't boot from the new hard drive, check the color of the 4 diagnostic LEDs on the front panel. If not all green, look up the error codes here.
1) Did you change SATA Operation in BIOS Setup to RAID Autodetect/ATA before trying to install XP? If not, XP probably didn't even see the hard drive (new or old).
2) Did you install the SATA driver from a floppy diskette during the XP installation by pressing F6 when prompted?
If you did both 1 and 2 (above), you need to change SATA Operation back to RAID Autodetect/AHCI before it will boot again.
If you did not do both 1 and 2 before trying to install XP, then you need to change SATA Operation to RAID Autodetect/ATA before it will boot again.
Guess I don't understand WD My Book. Is that an external USB hard drive? You should be able to download and install the software on some other PC to retrieve files from that drive.
Ron
- Thank you Ron for trying to help.Again my apologies my neighbor who did help me the first time I had a crash with a restore/reinstall tried again and this time and it didn't work. As I observed the last time we did this, I felt we missed a step . I don't want to bother him anymore as he is very busy. So I am making my last ditch effort on my own.We removed the old hard drive in hopes that someday I can retrieve the information on it. So i would prefer not to do a PC Restore on them.
I do not know my neighbor formatted the new hard drive. I would assume he did.Is there a way to check if it is formatted? Sorry I am willing to try anything.
The drives are SATA drives, the bios setup is at Autodetect/ATA
I did not do F6 to install the SATA driver from floppy diskette during install.I know the last time my neighbor restored/reinstalled winxp on my computer with the new hard drive he had made a CD-R called the Intel Matrix Storage Manager and Driver. We did not use it this time. Not sure if this has the Sata Drivers on it.I do get through the windows xp professional set up, it gets me to the part where I have to install to a partition and I chose NTFS file system format. It told me setup was formatting the partition. Setup copied the files and then the screen goes black. In order to do this we had to unplug the cd-rom drive so that the set up could read off the DVD drive that is not in the bios setup. My neighbor made we watch the setup for when it was complete and i had to remove the disk prior to the computer restarting. I guess so it would read from it any longer and to read off the hard drive ( I am assuming, again I am sorry I am a novice)The WD my Book is the external hard drive where I have my back up files. I had trouble the last time trying to retrieve information from the backup hard drive. So I sent Western digital a message below is my question and response from them so you can understand.is it possible to dowload files off of the mybook essential edition backup from my xp computer to my new hp touchsmart with windows 7. The backup files to open are not recognized by the system. Is there something I need to download. I only want to install my music an my pictures to the new computer but I can't get it off of the mybook. Please advise.Thank you for contacting Western Digital Customer Service and Support. My name is Gustavo R.
I apologize, unfortunately the backup software neither the drive itself is compatible with Windows 7, it might work but we do not guarantee it.Thanks again,
Soph
If you told it to use NTFS, then -yes- you did format the new drive. And since you didn't install the SATA drivers from a floppy, BIOS has to be set to RAID Autodetect/ATA. That CD with Intel Matrix Storage Manager was the SATA driver.
Are you saying that the CD and DVD drives are both SATA drives? The hard drive has to be SATA, but optical drives can either be SATA or PATA (= IDE).
Let's try this:
Power off and unplug
Press/hold power button on tower for ~15 sec
Open the case and remove the motherboard battery (be sure to note which side is up before you remove it!)
Then press/hold power button on tower again for ~30 sec
Assuming the optical drives are SATA drives, move the cable from the DVD drive to the SATA(1) port on the motherboard (probably the port where the CD drive was connected). (The hard drive must be connected to SATA(0).)
Reinstall the battery (right-side-up!)
Close the case and connect only mouse, monitor and keyboard.
Reboot and press F2 to go into BIOS setup
Look for SATA Drives 0 through 3 option and disable SATA(2) and SATA(3) ports
Now look for Boot Sequence option and make sure the hard drive is first on the list.
Make sure the DVD drive is empty and closed. Save the changes to BIOS setup and exit setup.
See if it boots now. If that works, you can reconnect the CD drive. You can connect it to SATA(2) or swap CD and DVD drives to their original ports. Remember to turn SATA(2) on in BIOS so both drives work. SATA(3) should still be off in BIOS since you don't have a drive connected there. Always power off, unplug, etc before working inside the case.
If it still doesn't boot, post the colors of the 4 diagnostic LEDs on the front panel, in the correct order.
Ron

RoHe
12 Elder
•
45230 Posts
•
172625 Points
397
0
Posted April 18th, 2011 17:00
You need to be more specific before anyone can help you.
What was the original problem that led you to replace the hard drive? Is the new one connected to SATA(0) on the motherboard?
Why did you even replace the hard drive if it passed the diagnostic tests?
Did you format the new hard drive? What file system?
Why did you disconnect the CD drive and use the DVD drive? Is the XP Reinstallation disk a DVD?
You could always install the drive with your files as a secondary drive in the other PC and copy off whatever you need onto the Winn7 boot hard drive in that system.
Ron