
UNSOLVED
Optiplex GX270 won't recover from stand-by mode
I have a Dell Optiplex GX 270, Windows 2000 Professional. The computer was left alone long enough to go into standby mode, even though in Windows, I had set the power management settings to never go into standy-by or hibernate. Now, the system won't recover from this. I have unplugged it and reset the jumper. I downloaded the BIOS update, but I can't use it until I can get the computer to boot up. I even unplugged it and left it unplugged over night to see what it would do. Still nothing. The power light is still flashing amber. I completely took the password/rtc jumper off and tried to boot the system. The power light turned green when I pressed it but immediatly went back to flashing amber. I've tried the jumper in both positions, but with no luck. This is a school computer in a multimedia/business lab. It is higly important to get it back up soon. Any suggestions would be greatly appreciated!!!!!!
Responses (3)
Solutions (0)
- Call and get a new motherboard. Before calling, look at the capicitors on the m'board. If the tops are not flat, or they are leaking, it is time for a new 1. Dell has been hit with this industry-wide problem late in the game. You will also have to be insistant with the Dell Cust Service reps on the phone about this. Good luck.
the_apostate
108 Posts
281
0
Posted October 15th, 2004 10:00
Hi burdim,
I wouldn't completely agree with the replacing the Motherboard for the blinking amber issue, because from my experience it is the power supply that has been found faulty when there is a blinking amber as the power indicator. My understanding with the capacitor issue is that the front indicator will be steady green and back indicators will usually be off..
** This is my understanding - I could be wrong....
The Apostate

the_apostate
108 Posts
281
0
Posted October 11th, 2004 00:00