UNSOLVED

ericlaiys78

updated

3 years ago

Closed

E

ericlaiys78

1 Rookie

•

1 Message

1

61318

May 26th, 2011 10:00

Optiplex 790 cannot support 16gb memory

i just received optiplex 790. According to spec, this machine can support up to 16gb. But when i put 4GB into each DIMM. The system wont boot up and keep reboot and off. Then, i try add each 4GB into the DIMM.All working fine except on DIMM 2. If i try put 2GB, then it is working fine. Total RAM is 14GB. Replace 4GB into DIMM 2, the problem happen again. Tested and it is not memory problem.any idea why this happen? or does it because the max memory the machine can take is 14GB. Pls advise

  • speedstep

    11 Legend

    •

    46969 Posts

    841

    0

    Posted May 26th, 2011 12:00

    Unless you have only a single dimm they must be replaced in pairs and usually from the same vendor.

    You cannot use an odd number.

    Each memory slot can hold DDR3 PC3-10600 with a maximum of 4GB per slot.

    Up to 16GB4 Dual Channel DDR3 SDRAM at 1333Mhz - 4 DIMMS

    The Ram Must be Dual channel.

    The Onboard INTEL video steals from SYSTEM Ram.

     

    OptiPlex 790 Desktop Details | Dell

    Richie992024

    1 Rookie

    •

    36 Posts

    •

    25 Points

    0

    May 18th, 2024 01:06

    @speedstep​ 

    Even this thread in old - 2011, but I'll still answer - I also have 790, I currently have 32 gigs of ram, this post could be that the rams is not completely seated in slot 2.