
UNSOLVED
J
jasonwayneryan
4 Posts
0
30055
July 26th, 2015 09:00
No video output on Optiplex 7010 sff after trying pcie card upgrade.
i tried installing a PNY VERTO nVidia GEFORCE gt 610 and when i booted, there was no display during post or after and realize that my power supply fell short of the card's requirements. the system seems as if it's working, aside from there being absolutely display output from the two onboard display ports or vga port. i had anati radeon 4350 for a couple of days, but didn't have the dms59 adapter cable, so i had been using the onboard display port with a dvi adapter dongle. i may have disabled the onboard video in the bios, but can't see anything to be able to check it and change it back. i don't know what to do. any help is greatly appreciated.
Jason
Opyiplex 7010 SFF
3.4ghz i5
running windows 10 tech preview installed to
Toshiba 120 gb ssd
secondary drive is the 500gb seagate that came with the system
4gb ram in slot 1
Service tag: <ADMIN NOTE: Service tag removed per privacy policy>
running windows 10 tech preview
Responses (4)
Solutions (0)
jasonwayneryan
4 Posts
2824
0
Posted July 27th, 2015 12:00
the monitor says no input no matter which output i plug in to on the motherboard. i can't see anything during post, so i can't enable the onboard video again.
DELL-Rishi
6 Operator
•
2035 Posts
2824
0
Posted July 29th, 2015 16:00
Hi Jason,
Have you tried plugging in the video card again on to the system and check?
Could you remove the CMOS battery from the system, turn on the system and after about a minute, turn it off, put the CMOS battery back and turn it back on and check if it works?
Download the manual - http://dell.to/1KANLk6 - see how to reset and clear the jumpers. This might possibly help!
Although the system is posting as stated by yourself, the issue seems strange. However, I would still suspect the motherboard might be causing the issue at this point, if there is no video through the onboard ports or the graphics card.
jasonwayneryan
4 Posts
2824
0
Posted August 24th, 2015 15:00
it was due to a bad front panel power connection on the motherboard.

DELL-Rishi
6 Operator
•
2035 Posts
2824
0
Posted July 26th, 2015 16:00
Hi Jason,
You would need to enable the multi-display option in BIOS