UNSOLVED

livingez123

updated

16 years ago

L

livingez123

12 Posts

0

881

March 23rd, 2011 18:00

I tried to do a clean install of windows 7 on a older desktop....E521

I had to remove half of my RAM (2GB) to get it to install correctly. after all the updates were loaded I tried to install the rest of my RAM and the computer wont go past the windows starting screen. it just hangs up there. If I remove the  RAM all is good. This desktop was working fine with all of the RAM installed and running XP.

 Any ideas? Bios issue? MB issue?

 

I ran memtest86+ and all came back good, I also ran CHKDSK on the HD and it came back good.

I'm lost.

any help would be great!

Thanks

  • livingez123

    12 Posts

    239

    0

    Posted April 5th, 2011 18:00

    Back to the top,

    someone has to have the answer.

  • livingez123

    12 Posts

    239

    0

    Posted April 5th, 2011 18:00

    I tired that. It will boot with 1GB...2GB but not 4GB.

    I ran a Memtest on it and all is good with the memory.

    I guess if I have to I will just reinstall XP and be done with it.

  • rdunnill

    8 Professor

    •

    8811 Posts

    •

    35254 Points

    239

    0

    Posted April 5th, 2011 18:00

    Vista and 7 are much more sensitive to errors than XP. I'd try swapping the problematic RAM sticks into the lower memory slots and booting to see if the problem occurs even without the full 4gb.