UNSOLVED

yheitman

updated

19 years ago

Y

yheitman

14 Posts

0

21625

June 3rd, 2007 16:00

Help! I need a good repair person-Serious problem-Stuck on Dell Screen with no bootup menu

I have just enough computer knowledge to be dangerous.  I have some serious issues with my Dell Dimension 2400 desktop.  It has Windows XP installed with an 80 GB hard drive and the processor is, I think, a Celeron 2.? GHz, with 1 GB memory.  I was trying to put a new Sound Blaster sound card in and no matter what I did, it wouldn't work.  I even spent an hour on the phone with Sound Blaster technical support and they couldn't get it to work either.  So they told me to uninstall the thing and go into program files and delete the folder with all their stuff in it which was labeled "Creative".  I did that and then I was prompted for a restart and when the computer restarted there was an error messae that was coming up that said Diskette drive 0 failure and a black screen that would come up with an error message that said "no bootable devices-strike F1 to reboot F2 for setup".  Well F1 definitely did not work and F2 was trying to boot up from a diskette drive.  When the black screen would first come up it would also say Keyboard Failure but the keyboard seemed to be just fine.   I do not have a floppy drive and when I tried to change the boot order to boot from the hard drive first it said there was no hard drive installed.  There was a SATA at one time on the F2 setup utilities and that disappeared as well.  Then I got a blue screen that said that said my hard drive had failed or had viruses and Windows was shutting me down to protect my computer.  I tried swapping out the hard drive with another computer that was fine and I still kept getting the same error messages.  I took the original hard drive to a computer repair place and they said the hard drive had zero viruses on it and it was just fine and they thought the operating system had gone bad and advised me to reinstall it.  Well, I tried that and it wouldn't let me reinstall the operating system because it got to a window that said there was no hard drive.  So when I bowed out of the install of the operating system and restarted, I got a Dell screen with the white line that only advances about a half an inch and there is NO OPTION to boot up the computer with F2, F8, or F12.  No matter what I do it won't advance.  So do I buy a new motherboard or is there some way to force it to go to a boot menu?  HELP!!  I do not have the option into going into the BIOS, all the cables are connected just fine, I used two different cables for the hard drive and I am getting the same error message with both, the fourth diagnostic light is amber and the A,B,C are all green.


Message Edited by yheitman on 06-03-2007 12:48 PM

Message Edited by yheitman on 06-03-2007 01:02 PM

Message Edited by yheitman on 06-03-2007 01:05 PM
  • yheitman

    14 Posts

    710

    0

    Posted June 3rd, 2007 17:00

    I am very careful with the cables and have made sure there are no bent pins and they are all seated properly so I'm stuck big time!!!
  • mombodog

    2 Intern

    •

    12735 Posts

    710

    0

    Posted June 3rd, 2007 17:00

    The error code suggests you disturbed a cable or add in card. Open the case and be sure all cables and cards are seated properly.
     


    Message Edited by mombodog on 06-03-2007 01:16 PM

    Message Edited by mombodog on 06-03-2007 01:16 PM
  • yheitman

    14 Posts

    710

    0

    Posted June 3rd, 2007 17:00

    I live way out in the country so when I go to work tomorrow I'll take the battery with me and buy another one at Radio Shack.  I sure hope it's the battery because I have probably spent a good 6 straight hours on it and I'm about to pull all my hair out.
  • mombodog

    2 Intern

    •

    12735 Posts

    710

    0

    Posted June 3rd, 2007 17:00

    Re-read my post I edited it after further research.
  • yheitman

    14 Posts

    710

    0

    Posted June 3rd, 2007 17:00

    I'm really confused because when I took the supposedly bad hard drive from the Dimension 2400 and put it into my Dimension 4600 that is working just fine, I got all the same error messages.  Then I took my good hard drive from my Dimension 4600 and put it in the bad Dimension 2400 and got the same error messages again.  When I put my good hard drive back into my Dimension 4600, the desktop was just fine.  I was willing to sacrifice all my data on my 4600 hard drive if I could get the operating system up and running again on the Dimension 2400, but no go.  Any ideas?
  • yheitman

    14 Posts

    710

    0

    Posted June 3rd, 2007 17:00

    I
  • yheitman

    14 Posts

    710

    0

    Posted June 3rd, 2007 19:00

    Also, I need step by step instructions please on how to backup the files in the supposedly bad hard drive when I reinstall it as a secondary hard drive on my 4600?  I have no idea how to do this.  All the website talk about copying it to a floppy, I do not have a floppy drive.  All I have on both the 2400 and the 4600 is CD/ROM drives and DVD drives.  No burners.  HELP!!
  • yheitman

    14 Posts

    710

    0

    Posted June 3rd, 2007 19:00

    Ok, after I plug in the loose connection and restart the computer I get a really quick flash of the normal Windows screen with the flying flag and then it goes into the black screen that asks how I want to restart the computer, normal mode, safe mode, etc.  When I choose any of the options I get a blue screen with the Stop error "0x0000007B" and from reading on the internet it appears that registry keys got messed up when I uninstalled the Sound Blaster and all its folders.  The thing is that the on-line the suggestions are to reinstall the XP OS (I can't because I can't get past the blue screen), to start it in safe mode with command prompt and type something about chkdk/f or something like that (I can't because I can't get past the blue screen).  The CD-ROM is not running the Windows XP OS disk because it says it isn't installed, when it is.  I have tried setting it so that the CD-ROM is the first thing it boots from but that doesn't work either.
     
    So if the registry keys are corrupted and that is what is causing the OS to not allow startup, how do I get them back?
  • mombodog

    2 Intern

    •

    12735 Posts

    68

    0

    Posted June 3rd, 2007 19:00

    Just copy and paste any files you need to the 4600 hard drive, make a folder called "2400 backup" and save everything there.
  • mombodog

    2 Intern

    •

    12735 Posts

    710

    0

    Posted June 3rd, 2007 19:00

    If you mount the problem drive as a secondary drive in the 4600, you can save any important data you need, then you can also run a chkdsk on the problem drive while it is in the 4600, also scan for viruses and malware.