UNSOLVED

gx240user

updated

20 years ago

G

gx240user

8 Posts

0

9841

July 12th, 2006 15:00

GX240 power supply questions

First question:
 
Its my understanding that you can use any old standard ATX psu in a GX240.  However, without cutting up the case (which I don't want to do), the psu can't have a switch.  Otherwise, the switch interferes with the mounting of the psu. 
 
I am looking for a 350W (or greater) psu that doesn't have a switch and the power connector is aligned with the cutout in the back of the case for the power cord.
 
I have read in another thread that IBM has a Hipro 340W but I can't find a brand new one on Ebay and i'm not too keen on getting a used one. 
 
Second question:
 
If I have to go with an underpowered psu, i'de like to go with a Fortron.
 
One thing that doesn't make sense is why the FSP 300W psu is not available for GX240 on the atxpowersupplies site.

Compare the following:

http://www.atxpowersupplies.com/300-watt-power-supply-fsp-atx-300-gu.php

http://www.atxpowersupplies.com/250-watt-power-supply-FSP250-60ATV-1A.php
It looks like the only difference is the 4 pin video connector.
 
I'm surprised that the 250W lists the GX240 but the 300W does not.  What's the difference?  Does this mean that the GX240 does not use a standard ATX psu?   
  • FFXJCE

    21 Posts

    227

    0

    Posted July 12th, 2006 17:00

    I don't know the power output of it but...
     
    Quotith SpeedStep from http://forums.us.dell.com/supportforums/board/message?board.id=oplex_other&message.id=23182&view=by_date_ascending&page=2 regarding GX260s:

    "PC Power and cooling makes a power supply that fits into the dell without issue but its $150.   This IMHO is too much when a

    pair of tin snips or nibbler tool is $20 or less."

    As for the 300W you mentioned, I don't see anything significant, but it could be something like vent placement, per rail power requirements, or perhaps the physical length of the power supply.

  • speedstep

    11 Legend

    •

    46969 Posts

    227

    0

    Posted July 12th, 2006 23:00


    @FFXJCE wrote:
    I don't know the power output of it but...
     
    Quotith SpeedStep from http://forums.us.dell.com/supportforums/board/message?board.id=oplex_other&message.id=23182&view=by_date_ascending&page=2 regarding GX260s:

    "PC Power and cooling makes a power supply that fits into the dell without issue but its $150.   This IMHO is too much when a

    pair of tin snips or nibbler tool is $20 or less."

    As for the 300W you mentioned, I don't see anything significant, but it could be something like vent placement, per rail power requirements, or perhaps the physical length of the power supply.



    You left a lot out.  Including the part about Cheap and FAKE PSU's being used.

    Buying a non dell power supply Does not void your warranty. It doesnt mean that dell must warranty that part. The Magnuson-Moss Warranty Act makes Illegal any TIE IN SALES. AKA you are NOT REQUIRED to buy DELL PARTS for your Dell. That would be a tie in sale and Illegal.
    http://www.ftc.gov/bcp/conline/pubs/buspubs/warranty.htm

    You Ignore a cheap PSU at your own Risk.  A $20 or $35 unit is not likely to be a REAL 350 or higher unit.

    http://www.tomshardware.com/2005/07/11/stress_test/

    Cheap Fake PSU = Burnt motherboard/cpu/hard drive/video = dead machine. There are even COUNTERFEIT power supplies with brand names but even the brand is FAKE.

    $20 is not a price that I would trust for a power supply.  Especially since the makers of GOOD power supplies sell them in the $60 to $150 range.

    PC Power and cooling makes a power supply that fits into the dell without issue but its $150.  
    This IMHO is too much when a pair of tin snips or nibbler tool is $20 or less.

    There is Absolutely Nothing whatsoever WRONG with
    PC Power and cooling's PSU's  They are Fine.
    They do not however have a lifetime warranty
    like the BFG models do and they cost too much IMHO.

    Same or better PSU from BFG and a hackjob is $99 range.

     

     

     

     


  • FFXJCE

    21 Posts

    227

    0

    Posted July 13th, 2006 11:00

    "You left a lot out.  Including the part about Cheap and FAKE PSU's being used."
     
    So much for being to the point.  The link was provided for a reason, not for show.
  • gx240user

    8 Posts

    227

    0

    Posted July 14th, 2006 06:00

    I don't know what happened to my previous post, but its moot at this point.

    See my post here:

    http://forums.us.dell.com/supportforums/board/message?board.id=oplex_other&message.id=23616&jump=true#M23616

  • speedstep

    11 Legend

    •

    46969 Posts

    227

    0

    Posted July 14th, 2006 18:00



    @gx240user wrote:

    I don't know what happened to my previous post, but its moot at this point.

    See my post here:

    http://forums.us.dell.com/supportforums/board/message?board.id=oplex_other&message.id=23616&jump=true#M23616




    The GX240 uses standard ATX 12v version 2 wiring.

    The information referenced in the other post is not correct.
  • gx240user

    8 Posts

    227

    0

    Posted July 16th, 2006 18:00

    Any comments on this 350W psu?
     
     
    It's a Sparkle/Fortron which is a plus
     
    It seems to have the power connector in the right location.  No switch.
     
    "Complied with ATX and ATX12V standard"