
UNSOLVED
S
stealthgeek
1 Rookie
•
63 Posts
0
17999
September 15th, 2006 20:00
Flip SLI card on Motherboard??? XPS700
I just upgraded my XPS700 to dual video cards, or at least I think I did.
My system was delivered with a single 7900GTX set up, installed in
PCI-Express x16 card slot (SLOT4). I Installed a identical second card into
PCI-Express x1 card slot (SLOT1), hooked up power connecter and installed SLI jumper between both.
Problem, not noticing much of an improvement. I've been researching on Nvidia's SLI forum and have been hearing about things that I don't understand or know of. One thing I heard was that there is a card on the motherboard that needs to be "flipped" to enable dual cards. Also I read that settings must be changed in BIOS in order to enable SLI. The only thing I've done so far is plug in the second Dell7900GTX, as descibed above, and then checked the box in the Nvidia Control panel to enable SLI. Oh yea, I also installed the latest dirver from Nvidia 91.47 (i think).
Also, I have the monitor plugged into the card in SLOT4 (is this the primary card?) . Should I move it to the new card in SLOT1? My main question or concern though is the fact that I haven't seen, or know of a
SLI card on the motherboard that needs to be moved/flipped. Also, I haven't seen anything obvious in the
BIOS related to SLI or dual card configuration. Alot of the stuff I see in the BIOS looks like greek to me so maybe I'm overlooking something.
Thanks again for your help :smileyhappy:
Message Edited by stealthgeek on 09-16-2006 02:44 PM
Responses (22)
Solutions (0)
Robertf900
472 Posts
336
0
Posted September 15th, 2006 20:00
Do you have Ntune ?stealthgeek
1 Rookie
•
63 Posts
336
0
Posted September 15th, 2006 21:00
I have installed nTune, have enabled overclocking in BIOS, have checked the "Enable SLI multi-GPU" in the Nvidea Control Panel. Have installed video card, sli jumper and power supply cable.Is there a simple how to guide available that is XPS700 specific on upgrading to Dual-GPU?
stealthgeek wrote:
My main question or concern though is the fact that I haven't seen, or know of a SLI card on the motherboard that needs to be moved/flipped. Also, I haven't seen anything obvious in the BIOS related to SLI or dual card configuration.
The above is not relevant to the XPS 700. If you have enabled SLI in the driver - you are good to go.The only other thing you need to do - for nTune adjustments - is to go into the BIOS under the Performance section and turn on the SW overclocking option.
Then let 'er rip...and game yourself til you drop this weekend! :smileytongue:stealthgeek
1 Rookie
•
63 Posts
336
0
Posted September 15th, 2006 21:00
I know you guys probably think I should join the Nvidia SLI forum but I think my questions may be XPS700 specific. Something else I'm not seeing is the "GPU load balancing" green indicator lines (with box checked or not checked). This is another thing that leads me to believing maybe there is something I missed. Or maybe, Dell disabled this feature....I don't know.
stealthgeek wrote:
Also, I have the monitor plugged into the card in SLOT4 (is this the primary card?) . Should I move it to the new card in SLOT1? Thanks again for your help :smileyhappy:
No. The monitor should stay connected to the original card -- the upper one with the tower standing upright.Also you did not describe the applications you are using. SLI will only make a noticeable difference in PC games, not in the image quality of still pictures or internet pages. You will also only see GPU load balancing while gaming.
Message Edited by Aivas47a on 09-15-2006 07:58 PM
That's everything - you should see both GPU's in nTune. If the OS and driver were not seeing both cards, you would not have the option to enable SLI multi GPU mode.
stealthgeek wrote:
I have installed nTune, have enabled overclocking in BIOS, have checked the "Enable SLI multi-GPU" in the Nvidea Control Panel. Have installed video card, sli jumper and power supply cable.Is there a simple how to guide available that is XPS700 specific on upgrading to Dual-GPU?
hojusimpson
81 Posts
336
0
Posted September 15th, 2006 23:00
You mentioned that you installed the 2nd card on the PCI-Express x1 slot? The XPS 700 motherboard comes with 2 PCI-E x16 slots so that's where the 2nd cards should be in.
Aivas47a wrote:
stealthgeek wrote:
Also, I have the monitor plugged into the card in SLOT4 (is this the primary card?) . Should I move it to the new card in SLOT1? Thanks again for your help :smileyhappy:
No. The monitor should stay connected to the original card -- the upper one with the tower standing upright.
Huh? Maybe this is user preference, but I call Slot 4 the primary PCI-E x16 slot and that is the lower card and I always use the connector farthest from the S-Video jack as the primary monitor for that card.Just to be clear, I'm not saying any way is better than another and I'm not sure it really matters where you put one monitor in SLI mode...haven't really tried to see if there is any difference cause I'm just one of those creatures of habit.
stealthgeek
1 Rookie
•
63 Posts
245
0
Posted September 16th, 2006 02:00
The only game I've played so far on the system is F.E.A.R. During game play (with GPU load balancing box checked) I don't see the "GPU load balancing" green lines anywhere. This, along with a very small increase in FPS, leads me to believe there is something I've missed. I read on the Nvidia SLI site that you can see up to an 80% increase in FPS, I'd say I'm only seeing 20% max. Does anyone know if the GPU load balancing feature works while playing F.E.A.R.?

stealthgeek
1 Rookie
•
63 Posts
336
0
Posted September 15th, 2006 20:00
Message Edited by stealthgeek on 09-15-2006 04:51 PM