UNSOLVED

Scotty45

updated

19 years ago

S

Scotty45

14 Posts

0

19993

September 21st, 2007 12:00

Fan holes at back of 710 H2C

Hello,
        Im not sure if this is known and im just silly not to know this but here goes anyway!

  At the back of my 710 H2C i can see 6 holes which look to me as if a 92mm fan or a 120mm fan can fit into.
   Is this true? And if so can i fit a fan without voiding the warranty, do i have to buy a fan from dell?

               Regards,
                              Scotty.M
 
P.S  I have tried emailing Dell but they have not replied to me after 4 days ?!


Message Edited by Scotty45 on 09-21-2007 02:35 PM
  • Gontue

    180 Posts

    300

    0

    Posted September 21st, 2007 13:00

    I looked at the back of my computer and see those holes your talking about.  Keen observation on your part.  Can the motherboard control an additional fan?  I wonder why you feel the need for an additional fan?  My system temperature hanges around 30C all the time.  Is yours higher than that?
     
    XPS 720 H2C
    QX6700 2.66GHz Overclocked to 3.47GHz
    4GB RAM
    Dual 768MB nVidia GeForce 8800GTX
    Raid 0 Dual 160GB 10000 rpm
    X-Fi sound card
    Ageia PhysX Processor
    1 kilowatt Power Supply
    Windows XP Pro
  • ZBoater

    473 Posts

    300

    0

    Posted September 21st, 2007 15:00

    Are the holes you guys talking about screw holes?  Would a fan be positioned there to EXTRACT air from the inside of the case?
  • Scotty45

    14 Posts

    300

    0

    Posted September 21st, 2007 16:00

    My temps are ok, good and stable. But i wouldnt mind adding another one for my own comfort, if you know what i mean.
      Im not sure if the motherboard it self can take another fan (even though the manual say there are 5  5pin fan connection but only shows 2...?)   If i was to get a fan it would be a 4pin molex connection.  But these holes i do think  92mm and 120mm fans fit into.....but is this allowed.....does it void warranty ( if so why put the holes there in the first place?!!?)
       Later tonight i might fitting a 92mm fan in and see if it fits ( it wont work cause it a 3pin connector)

        Regards,
                     Scotty.M   (UK)

    P.S    The fan would be used to Extract air


    Message Edited by Scotty45 on 09-21-2007 06:24 PM
  • Gontue

    180 Posts

    300

    0

    Posted September 21st, 2007 17:00

    My XPS 710 H2C book says four 5 pin connectors for fans.  I just looked at my old XPS 710 MOBO and only counted three.  one for the CPU, one for the card fan and one for the hard drive fan.  I couldn't find a fourth one on there.  My XPS 720 book says three 5 pin connectors.  This is correct.
     
    I have a question..  what will control the fan you install there?  Does it have it's own thermal sensor?  Would it's speed be adjustable both autmatic and manual? or not at all?
     
    XPS 720 H2C
    QX6700 2.66GHz Overclocked to 3.47GHz
    4GB RAM
    Dual 768MB nVidia GeForce 8800GTX
    Raid 0 Dual 160GB 10000 rpm
    X-Fi sound card
    Ageia PhysX Processor
    1 kilowatt Power Supply
    Windows XP Pro
  • Scotty45

    14 Posts

    300

    0

    Posted September 21st, 2007 17:00

    The fan would be controlable through ntune if it connected into the motherboard.
    But id rather just get a fan that plugs straight into the power supply (4pin molex) with a fan controller ( like the zalman "fanmate" ) to change the voltage
       Or it would be, again a 4 pin molex fan  but fixed speed. I have my mind set on a 1200rpm  49CFM   17Db fan

         Regards,
                        Scotty.M       (UK)


    Message Edited by Scotty45 on 09-21-2007 07:45 PM
  • tphillips63

    4 Apprentice

    •

    2629 Posts

    •

    7922 Points

    300

    0

    Posted September 22nd, 2007 00:00

    Those holes are there for you to use with your own fan. They added them because they had the room and for future possible cooling usage but the MOBO does not have a fan header for a fan so you do need to use the regular fans like you want to do Scotty.
  • Scotty45

    14 Posts

    300

    0

    Posted September 22nd, 2007 06:00

    So does that mean I can fit a fan i have bought somewhere else and it does NOT void the warranty?
     
    Edit:
    I have put a 92mm exhuast fan at the back.  Fits perfectly and has dropped me 4 degrees in system temp. 
          Good result for 2 mins of work.
          Thanks for all the help guys!
          
                   Regards,
                                  Scotty.M   (UK)




    Message Edited by Scotty45 on 09-22-2007 03:42 PM
  • odenwalder

    1 Rookie

    •

    1182 Posts

    300

    0

    Posted September 22nd, 2007 13:00



    Scotty45 wrote:
    So does that mean I can fit a fan i have bought somewhere else and it does NOT void the warranty?

                  Regards,
                                Scotty.M    (UK)



    Correct, adding your own fan will definitely NOT void your warranty. The machines are meant to be modded. Your warranty just won't cover any changes that you make yourself. I have added 3 HDDs and changed my memory completely from the original shipment.
  • tphillips63

    4 Apprentice

    •

    2629 Posts

    •

    7922 Points

    300

    0

    Posted September 22nd, 2007 14:00

    I'm just curious why you are even thinking adding a fan will void your warranty?
    That would never enter my mind as a possibility.
    First off how are they going to know you did add a fan and second how could it cause any problems?

    Message Edited by tphillips63 on 09-22-2007 10:31 AM
  • tphillips63

    4 Apprentice

    •

    2629 Posts

    •

    7922 Points

    108

    0

    Posted September 22nd, 2007 17:00

    haha :D