
UNSOLVED
Dual-Mode with 1800FP at Nvidia GeForce3 Ti200
Hi,
at the moment I run a Dimension 8200 with a 1800FP
which is connected at the digital port at the Graphic-card.
The graphic-card is a Nividia GeForce3 Ti 200
I already updated the drivers of the Graphic-card.
My question is
Can I connect a second 1800FP Display at the Analog port of
the Graphic-card and run this in Dual-Mode ?
I don't know if this Graphic-Card can handle two Displays in Dual-Mode.
Maybe somebody can give me some information if this work out
or I have to buy a new Graphic-card which can handle dual-mode.
Thanks in advance
Michael
at the moment I run a Dimension 8200 with a 1800FP
which is connected at the digital port at the Graphic-card.
The graphic-card is a Nividia GeForce3 Ti 200
I already updated the drivers of the Graphic-card.
My question is
Can I connect a second 1800FP Display at the Analog port of
the Graphic-card and run this in Dual-Mode ?
I don't know if this Graphic-Card can handle two Displays in Dual-Mode.
Maybe somebody can give me some information if this work out
or I have to buy a new Graphic-card which can handle dual-mode.
Thanks in advance
Michael
Responses (2)
Solutions (0)

DELL-Chris M
Community Manager
•
56891 Posts
•
232143 Points
324
0
Posted February 9th, 2005 17:00
Sure.
TV OUT UNDER WINDOWS XP -
* Go here:
http://www.fujitsu-siemens.co.uk/rl/servicesupport/techsupport/boards/Graphic/ProLink/GeForce2mx400/twinview.htm
TV OUT UNDER WINDOWS 98/ME -
* Click Start- Shutdown- Shutdown- Ok or Click Start- Turn Off Computer- Turn Off
* Power off the monitor and tv
* Reconnect the signal cable between the computer and the tv. Make sure there are no other devices in between, such as a VCR or a switchbox
****The TV must be on before the computer boots up***
* Power on the TV and change the channel to input, aux, video or line 1 or 2 (whatever the S-VIDEO is for your TV)
* Power on the computer
* Click Start- (Settings)- Control Panel
* Look to the left. If listed, click "Switch to Classic View"
* Click Display- Settings- Advanced- Output Device
* Click the GeForce tab
* Click nView
- Change to Standard for one monitor
- Change to (Twinview) Clone/Span for two monitors connected to one video card
* Click Desktop Utilities
* Remove the check from Enable Dualview
* Click Apply
* Click the Device Settings button
* Click Select Output Device
* Choose TV or output signal to TV
* Choose Analog Monitor to get back the normal monitor mode
* Choose the correct TV format to match local tv format (pal or ntsc)
* Click Apply- Ok
NVIDIA CLONE MODE -
* Power off the computer and monitors
* Power on the monitors
* Power on the computer
* Right mouse click on a clear area of your desktop
* Click Properties
* Click Settings
* Click the Advanced button
* Click the GeForce or nView tab
* Click to select Clone Mode and then click OK
* A warning window appears, click the OK button
* The second display device will initialize. If you can see the output correctly on both display devices, click OK when asked if you want to keep this display setting
NVIDIA EXTENDED/SPANNING MODE -
* Power off the computer and monitors
* Power on the monitors
* Power on the computer
* Right click the desktop
* Click Properties
* Click the Settings tab
* Click the Advanced button
* Click the GeForce or nView tab
* Make sure Clone Mode is DISABLED
* Click to select Extended/Spanning Desktop mode
* Click OK
This will take you back to the Settings tab. You will see two monitors represented by two blue boxes with the numbers 1 and 2 in them. Click the second monitor (2). Adjust the screen resolution as desired. NOTE: You may also drag the monitor icons around to adjust the relative position of the monitors
* Click the second monitor icon (2) and then click Extend my Windows desktop onto this monitor
* Click OK
* If a warning window appears, click OK. The second monitor will initialize and display the Windows background. You may have a dialog box that asks if you want to keep the current settings
* Click Yes
DELL-Chris M (old account)
#IWork4Dell