UNSOLVED

nigelbtn

updated

21 years ago

N

nigelbtn

6 Posts

0

11991

November 11th, 2005 13:00

Dimension 8400 flashing amber power light

Well I have bad news again, last night the flashing
amber power light was back. This is on my one year old
Dimension 8400. I am not sure I can face the endless
hours on the phone with technical support again. They go through the same script
completely ignore what you say, never call you back. Absolutely pityful.
After less than one year the harddrive
failed & was replaced & we had to reinstalll
everything. Since that time we've had 6 occurences of
the flashing amber powerlight. First time they
replaced the power supply. Next time (most recent)
they replaced the motherboard & power supply. After
that the DVD writer was not recognised so in working
with tech support to resolve that, we got to a point
where Windows would no longer initialize - 7B failure.
We were told the hardware was fine, its a software
issue & to reinstall. By last night I had the basic
software - Windows, Dell Tools, Norton reinstalled &
had logged off the system for a break only to come
back to the flashing amber light. There were no
storms, weather was fine, we have replaced surge
suppressors with new ones, changed power outlet in the
house. No other electrical item has an issue.
Where do we go from here ? We have been battling this
system for over 2 months. This is one of 4 Dell
systems I have purchased from you over time & I feel
it is time for a replacement. I have no confidence of
getting this 8400 back to a solid working system.
  • RoHe

    12 Elder

    •

    45230 Posts

    •

    172625 Points

    334

    0

    Posted November 11th, 2005 17:00

    Sorry about all your troubles with the 8400. But, this is a user's forum so if you're expecting a response to your post from Dell, you won't get it here. With the exception of the Moderators, Dell doesn't read these forums.

    I suggest you contact Customer Support, not Tech Support. Tell them how many things have been done to fix this PC under warranty and that it still isn't working. Politely tell them to replace it with a new system. Hope that works out.

    Ron
  • nigelbtn

    6 Posts

    334

    0

    Posted November 11th, 2005 18:00

    Thanks for the response. I wasn't expecting Dell to read it. This may be a dumb question but how do I contact Customer Support, not Tech Support ? I've tried customer service but they just seem to handle order issues, shipments etc & then I get routed to tech support. I was told to mail customer_service at Dell.com but that email is bad.

    I'm wondering if my heatsink needs replacing I see its REV 0 - almost everything else has been replaced. Also I noticed my replaced power supply is REV 0 (I wish I  new what REV the previous ones were - I saw on the forum where someone went from REV 01 to 04 & it appeared to fix their problem. 

    Thanks again. Nigel

  • RoHe

    12 Elder

    •

    45230 Posts

    •

    172625 Points

    334

    0

    Posted November 11th, 2005 18:00

    There used to be a Customer Service forum, but they took that away. I guess you just have to call Tech Support and ask to be transferred to second level support and keep escalating it until you find someone willing to do something.

    The blinking amber light sounds like power supply again. So you can ask for another power supply, assuming system still under warranty. Chances are if the new one is rev 0, the previous ones were too. Dell tends to put in exactly what they take out. Maybe you just have bad luck with PSUs?

    Ron
  • beast194

    34 Posts

    334

    0

    Posted November 12th, 2005 02:00

    There must be a reason the power supply keeps on shorting out.  Are your electrical outlets properly grounded?
  • nigelbtn

    6 Posts

    334

    0

    Posted November 12th, 2005 11:00

    I don't have a problem with anything else electrical plus the 8400 ran for 8 months no problem until the harddrive failure then its been downhill since. The 8400 is in a grounded surge which has been changed from the original plus I've switched wall outlets. I'm wondering the significance of Rev 00 on my power supply when I read on this forum about okay after rev 04. Also what about the heatsink possibly causing it to get to hot ??
  • RoHe

    12 Elder

    •

    45230 Posts

    •

    172625 Points

    334

    0

    Posted November 12th, 2005 22:00

    If you mean heatsink on the CPU, I think that's unlikely to affect the power supply. There was a run of Rev 0 power supplies that didn't work for very long, so it's possible you got another bad one. My 8400 has Rev 00 power supply and I've had no problems (knock on wood - my warranty just expired!).

    Just a thought. Totally unplug PC from the mains and move the voltage selector switch on the rear of the tower back and forth from 110 to 220V a couple of times. Make sure it's set to your correct supply voltage when you're done. Reconnect PC and see if it boots. There have been instances where the switch doesn't make a good connection, for whatever reason, and moving it back/forth cleans the contacts and that solves the problem.

    Ron
  • js9902

    4 Posts

    334

    0

    Posted November 28th, 2005 00:00

    I have a Dimension 8300 with the same problem.  I've tried a new power supply but that didn't work.  Finally bought a new motherboard and that worked for about a week and now I get the blinking amber light again.  Dell sent me a new (refurbished) motherboard  but now my computer is working again so I haven't put in the new motherboard yet.  I think it must be something else?  Did you figure out what is wrong with yours?  Thanks.

    Message Edited by js9902 on 11-27-2005 08:32 PM

  • nigelbtn

    6 Posts

    334

    0

    Posted November 28th, 2005 11:00

    No, mine is not fixed & I'll mention I'm completely fed up to put it politely with the whole process. After replacing the motherboard & power supply which was sent from Dell it failed almost immediately. I must mention I was busy with other things for a couple of weeks & did not turn the PC on. But once I did, it failed right in the middle of using it. Dell is now shipping me a new processor & memory. They say if it still fails after that, they will replace the system as the majority of components have been swapped. I agree with the person who saif if this was the car industry there would have been a recall by now. Dell also told me (which I'm not sure I believe) that if I'm not going to use the computer for 8 hours I should power off or it could go to the flashing amber condition. I have other PCs that I hardly ever power off.
  • js9902

    4 Posts

    334

    0

    Posted November 28th, 2005 19:00

    Thanks for the reply.  Sorry to hear they haven't fixed your's either.  I turned in a (negative) survey and Dell called today to see if everything was okay.  They still won't help me since it's not under warranty.  Tech Support did say they would help me over the phone to reinstall the second motherboard so I wouldn't have to pay someone to do it (this will be the third motherboard if you count the original one), I guess because the replacement parts have a 90 day warranty.  Funny how they recommended that I have someone install it for the first motherboard replacement they sent.  I taught computer classes for nine years at a community college and the computers were left on 24 hours a day, 6 or 7 days per week.  We only shut them down on the weekends in case of a storm (lightning), so I don't believe anything they say about powering down the system if not using for 8 hours.  I purchased a Dell since the College had better luck with them (Gateways broke A LOT!), but maybe Dell's quality is going down hill.  Hope you get one that works! 

    Message Edited by js9902 on 11-28-2005 03:52 PM

    Message Edited by js9902 on 11-28-2005 03:52 PM

  • Kohna

    1 Message

    117

    0

    Posted November 28th, 2005 21:00

    I have looked at the forum and was amazed on how many problems with the Dimension 8400 and the blinking light problem. My machine is 11 months old and having the same problem. I agree there should be a recall. From what I have read there is no clear direction on pin pointing the problem. What is a peson to do if Dell's tech support cant find what is causing it.
     
    I tried the voltage switch and that seemed to work onece I got it to boot up. Left it running 24/7 for over a week. I shut it down last night and bang I having the same problem but only worse. Before it would boot up and run a couple of minutes before shutting down. Now it goes directly to the blinking yellow light on the on/off button.
     
    Getting tech support from Dell seems to be poor at best if you can get a hold of someone. Any one have any suggestions?
     
    Ko