UNSOLVED

gerharta

updated

19 years ago

G

gerharta

1 Message

0

15134

November 9th, 2007 13:00

Corrupt driver file on my brand new XPS STUDIO 420?

I'm not sure what exactly the problem is.  I just got my new Dell on Monday and have been having problems with it ever since.  The most concerning is that the thing will just shut down on you.  It will reboot and say "Windows System Error" (I think) and give you the option of starting Windows normally or in safe mode.  Because the wireless mouse and keyboard do not work during this prompt, I start windows normally after like 20 sec by default.
 
Then Windows will work "normally" the rest of the day.  The next morning, however, the problem returns.  I have tried Windows startup repair and Windows restore (I have to bring out my old, wired mouse and keyboard to do this.)  I have tried installing "critical" updates, removing the automatic installation of updates, and several other things.
 
I thought I fixed the problem on several occasions.  Then it happens again.  I THINK it may have something to do with a corrupt file on my XPS MiniView.  Or it may be a BIOS thing.
 
Any insights would be great.
 
Thanks,
 
A Concerned New Dell Owner
 
PS - My next step is to call techsupport.  I'm dreading that.
  • toadvine

    40 Posts

    208

    0

    Posted November 13th, 2007 02:00

    If you're running Vista, the first thing I'd do is check in the Performance and Reliability Monitor (most easily found by clicking the start button and typing "Reliability" ) and checking to see what kinds of errors are reported in there - particularly anything that looks like 0x000000xx. You can also reboot, tap F8 a few times when you see the dell logo and choose Disable Automatic Restart on System Failure from the advanced options menu, then it should give you an error message instead of just rebooting right away.

    If you get a message either way, you can post it on here and let us figure it out for you or just plug it into Google or support.microsoft.com and find out what's happening. If you can't find any error messages, you could also try tapping F12, selecting the Utility Partition, choosing the Custom Test, selecting Non Interactive Tests Only and running their diagnostics.

    I'd put my money on there being a blue screen error of some kind which would tell you what's going on, but otherwise the diagnostics should dig up any kind of hardware issue that'd be causing this for you.

    Message Edited by toadvine on 11-13-2007 12:00 AM
  • cooklaw

    19 Posts

    208

    0

    Posted November 13th, 2007 05:00

    sounds like a driver issue.  what is XPS N. Am. tech support saying?
  • DELL-Chris M

    Community Manager

    •

    56891 Posts

    •

    232143 Points

    208

    0

    Posted November 13th, 2007 13:00

    gerharta,

    To check it, turn the miniview off and see if the PC runs any better.


    DELL-Chris M (old account)

    #IWork4Dell

  • cooklaw

    19 Posts

    208

    0

    Posted November 13th, 2007 23:00

    How was your experience w XPS tech support?  Was the issue resolved?
  • rgrokett

    3 Posts

    208

    0

    Posted November 24th, 2007 18:00

    Interesting... I just got a new XPS Studio 420 and also started having a similar issue. It was hung this AM and had to be hard reset and Vista did a Recovery back to the previous "known good" point. Now I get random blue screen failures. Since it auto restarts, I can't read the blue screen info in time, and I'm trying the BIOS Disable Auto Restart. I ran all the Dell HW diagnostics (CD and Windows version) and now have the System Diagnostic data collector running on the Reliability monitor. Also, I have now disabled UAC to see if that makes a difference. I also upgraded the BIOS to the 11/12/07 A02 version. So far have been unable to repeat the blue screen yet.
  • rgrokett

    3 Posts

    208

    0

    Posted November 27th, 2007 21:00

    Update: After the BIOS update and disabling UAC, I have had no more crashes, no matter what I try to do, so looks solid. One other item I changed was to change the power savings from the default of hibernating after several hours, to just sleep. No more hibernate. Russell
  • Davet50

    6 Operator

    •

    14442 Posts

    208

    0

    Posted November 27th, 2007 23:00

    Hubernating and standby on a desktop has always been a bit of a problem. Normaly they work well with laptops for which they were orginally designed to operate with to save battery life..
    There are lots of articles on the web on issues with them on desktops...