UNSOLVED

ruebenad

updated

20 years ago

R

ruebenad

3 Posts

0

3831

October 16th, 2006 13:00

Card Reading Bay from the 380 to the 690 help needed

Hi
 
A friend has given me his card reader out of his Precision 380 including connecting cable, the cable seems to only connect to an externsion of the usb/ieee internal board, but does not show up in my computer when a card is in place.
 
Do I need a different cable in order to use this card reader with the Precision 690?
 
Regards Rueben
  • Dilbatt

    191 Posts

    270

    0

    Posted October 17th, 2006 11:00

    I can't say for sure, but you should check the "USB for Flexbay" option in System Setup.  Maybe it is Disabled?
  • ruebenad

    3 Posts

    270

    0

    Posted October 17th, 2006 19:00

    Hi
     
    Thank you for your response but I did not see any details under F2 setup related to USB for FlexBay, not sure if i have one?
     
    All other reference to USB are set to on or auto.
     
    Rueben
  • Dilbatt

    191 Posts

    270

    0

    Posted October 18th, 2006 13:00

    So, if you don't see the option in System Setup, then the system is not detecting the card reader (the option appears if the system detects a device attached to the internal USB port for the Flexbay.