
UNSOLVED
Can my Nvadia 9500GT video card work on a new machine ?
Hello,
Your community has helped me so much in the past I am back for more. In January I installed a Nvidia 9500 video card in a Dimension 4700 machine. It has worked great. Now, my hard drive has crashed and I need to get a new CPU. I need to know if I can use my Nvidia 9500 in another desktop, such as the Insperion 530 ? Or, what other video card and CPU can I use for the same effect ?
Thanks so much !
Responses (11)
Solutions (0)
you said your Nvidia 9500 card worked fine on your 4700 Dimension. Good to hear but the specs for the power supply for the 4700 say the power supply is only rated at 305 w and the dell website says the XPX GeForce 9500 GT card takes 350w and the box it comes in says it takes 400w. Makes the issue pretty confusing. I guess if it works fine, then it doesn't matter. Anything I should know? Thanks
you said your Nvidia 9500 card worked fine on your 4700 Dimension. Good to hear but the specs for the power supply for the 4700 say the power supply is only rated at 305 w and the dell website says the XPX GeForce 9500 GT card takes 350w and the box it comes in says it takes 400w. Makes the issue pretty confusing. I guess if it works fine, then it doesn't matter. Anything I should know? Thanks
What you should know is that the 9500GT only needs around 60 watts to run not 350 or 400. The requirement stated by the manufacturer is for the entire system not just the card itself and this requirement is overstated by a considerable amount. Even the entire system would only need around 160 watts with the video card. Therefore, a 305 watt power supply is plenty for this particular card.
Gregg Kessloff
4 Posts
849
0
Posted May 23rd, 2009 09:00
Can someone please tell me why I cannot get the PCIe slots in two different Dimension 4700s to work? I have tried several Dell recommended graphics cards upgrades specifically for the Dell Dimension 4700 including a XFX NVIDIA GeForce 9500 PCIe, two VisionTek ATI Radeon HD 2600 XT PCIe, and a VisionTek ATI HD 2400 Pro PCIe. The BIOS on the Dell Dimension 4700 is set to Auto (the only other option is "Integrated"), but the video continues to be displayed only from the integrated VGA port. Every one of the graphics cards mentioned does not display graphics at boot, nor are they recognized by XPSP3 or Vista Ultimate SP1. I even upgraded the Dell Dimension 4700s to a 400 Watt PSU and disconnected all of the other peripherals, but had the same issue. If I put any of the mentioned graphics cards in a Dell OptiPlex GX620 desktop PC with only a 280 Watt PSU, everything works fine. I have tested the Dell Dimension 4700s with BIOS A5, A6, A7, A9 and A10.
Gregg Kessloff
Most 9500 GT's were full size cards so it will not fit. If it happens to be a low profile card, it may work but your maximum is a 25 watt video card on the PCI Express slot. I am pretty sure the 9500 GT exceeds this amount so I would have to say no. On the SFF system, you are pretty limited for the video card. Something like the HD 5450 would work since it only uses 20 watts.
i dont have slim tower actually i have a desktop that is little bigger than sff so will now gt9500 fit and i checked my psu is 280 watt as you said above there will no issue about psu and if you ask me which video card am i using now then it is radeon x350/x550/x1050 video card
The PCI Express x16 slot still only supports 25 watt video cards on the desktop system. You have very few choices based on this. Like I mentioned, the HD 5450 is probably your best bet. If you are trying to upgrade for gaming, I'm afraid it's not going to happen on this computer. The mini tower model is the only one that would that would work for better upgrades with the GX620. Both the 9500 GT and the HD 6570 use too much power.

Davet50
6 Operator
•
14442 Posts
846
0
Posted April 15th, 2009 14:00
Should work ok. you had a 305w supply in the 4700 and depending on your 530 configruation you have either a 300 or 350w supply.