UNSOLVED

JheOU

updated

22 years ago

J

JheOU

6 Posts

0

10191

February 11th, 2005 22:00

ADA885 Static on Dolby mode

I have a weird problem with my Altec Lansing ADA885 that I got with my old Dell 8100 system. In the past month the sound on Dolby mode has become distorted and static-sounding, but the other modes will work. Sometimes I can get the sound to come back correctly by turning the speakers on and off or even unplugging and re-plugging back into the sound card. I don't know what could be causing or how to fix this problem, any help would be appreciated. It's just on Dolby mode only, the other modes work (except prologic which doesn't produce any sound?).
  • 319

    0

    Posted February 12th, 2005 13:00

    you may have a trouble with that part of your card if it is the card other trouble will start too
  • JheOU

    6 Posts

    319

    0

    Posted February 12th, 2005 18:00

    It can't be the card because the speakers have done this on two different cards now. The digital output (dolby mode) is the problem, analogue works fine.
  • 319

    0

    Posted February 12th, 2005 22:00

    ok out of answers for now
  • JheOU

    6 Posts

    319

    0

    Posted February 16th, 2005 22:00

    Nobody's had static/distortion on these speakers?
  • 319

    0

    Posted February 26th, 2005 05:00

    I have the same problem with the static on my ADA885 only on Dolby mode. Similarly it has just started to happen in the last month. Unfortunately, I have not been able to solve the problem. I reinstalled my audio drives and to no avail.
  • JheOU

    6 Posts

    319

    0

    Posted March 25th, 2005 00:00

    I have a distorted or heavily static sound on Dolby mode. Mine started a few months ago, and now it's cutting in and out on Stereo and Stereo2 modes. This only happens when I set my sound card (Turtle Beach Santa Cruz) on Digital Output. The speakers work find on Analog Output. I'm starting to wonder whether or not it's the cable (or the y-cable with the yellow and black RCA inputs and the stereo output to the soundcard) that is the problem because sometimes I jiggle or unplug and plug it back in and it works for a while.
  • JheOU

    6 Posts

    319

    0

    Posted April 29th, 2005 20:00

    HELP! I really need to know if I should try to continue to fix this problem with any help or if I should just chunk these speakers since I can no longer get anything but terrible static when playing any sound in digital mode. It works fine in analog mode. I also tried using headphones through the Versajack on the Santa Cruz card to see if that was the problem, and the sound was fine. I ordered a new RCA-to-stereo jack y-cable and the problem is still there. Why would it work fine in analog but not in digital unless the speakers are crapping out? I don't know what else to do.

    Message Edited by JheOU on 04-29-2005 04:11 PM