UNSOLVED

sawaddi

updated

22 years ago

S

sawaddi

2 Intern

•

611 Posts

0

6351

August 28th, 2004 12:00

8400 with X800 SE driver issue

When I received my first 8400, I formatted and installed XP Pro with SP2. However, there was no driver on the Dell resource CD nor was there a driver to download from Dell's website.  So I installed first the 4.8 drivers from ATI then the 4.9 beta drivers.  Both resulted in frequent BSODs. Since I had an early 8400, Dell agreed to exchange the system for a new one.

When I received the replacement system, I tested it briefly and all seemed well.  I formatted and installed XP Pro with SP2 and all of the requisite drivers.  However, instead of using the Dell supplied video drivers on the resource CD, I installed the latest ATI driver (4.8).  With nothing else installed, I again experienced frequent system crashes (BSODs) with a variety of different Stop messages.  However, there was never a driver referenced in the Stop message.  So I uninstalled 4.8 and used the driver clean program.  Since the new resource CD did have a driver (unlike the original resource CD), I installed it.  Since then, the system has been flawless.

Based on my experience, I would say that ATI's drivers are not compatible with Dell's X800 SE or there is a driver conflict with XP SP2. 

Anyone else seeing BSODs with the X800 SE?

 

 

 

 

  • sgtcasey

    383 Posts

    164

    0

    Posted August 28th, 2004 13:00

    Nope, still locking up.  It was worth a shot though. 

    Dave

  • sgtcasey

    383 Posts

    164

    0

    Posted August 28th, 2004 13:00

    I have an 8400 with the X800 XT card and have a problem with lockups.  A replacement card is on the way from Dell, but I think I will give the drivers Dell sent a shot and see if that solves my problems just to rule it out.  Or not.

    Dave

  • Flemmy

    12 Posts

    164

    0

    Posted August 29th, 2004 23:00

    I had frequent lock ups with my 8400 as well. I thought the SP2 might be the problem, so I uninstalled all SP2 updates in the control panel, and voila, no more lock-ups, with any driver.
    Didn't solve my original problem though, I still can't run opengl based games(doom3, jedi academy...), they make my pc crash when I start the games.
  • kellinjar

    65 Posts

    164

    0

    Posted August 30th, 2004 03:00

    I have the x800se as well, brand new..no problems. Not one single crash or lock up. Get 48.8 fps on doom3, and far cry runs like a dream :)
    thats after running the ati cleaner and installing cat 4.8 drivers.

    Message Edited by kellinjar on 08-29-2004 10:24 PM

  • kellinjar

    65 Posts

    164

    0

    Posted August 31st, 2004 04:00

    yep I have sp2 which includes direct x 9.0c
  • sawaddi

    2 Intern

    •

    611 Posts

    164

    0

    Posted August 31st, 2004 04:00

    Did you install SP2?