UNSOLVED

minssimlove

updated

16 years ago

0

122662

December 29th, 2010 12:00

Aurora "Wake on LAN(WOL)" or "Remote Wakeup" on CMOS setup

Recently, I'm trying to setup "WAKE ON LAN(WOL)" on my Aurora ALX(Bios Ver. A10).

However, I failed to find an appropriate CMOS function on the motherboard.

I found the "Remote Wakeup" feature below CMOS "Power Management Setup" on the Aurora Manual (Fig. 1)

4213.Aurora Manual.jpg

(Fig. 1)  Aurora Manual

 

But there was no such "Remote Wakeup" feature on my CMOS Power Management Setup.

Instead I only see "USB Power in S5" selection (Fig. 2)

5531.CMOS Power Management Setup.JPG

(Fig. 2) CMOS Power Management Setup

 

So I called Dell techs and they said that such "Remote Wakeup" feature could be found on "Lan Option ROM" of CMOS Integrated Devices (Fig. 3).

6170.CMOS Integrated Devices.JPG

(Fig. 3) CMOS Integrated Devices

As they said, I just enabled that option but I still cannot use "Wake on LAN" feature.

My question is that if anyone has the same CMOS Setup display I have.

Am I the only one who has that kind of CMOS Setup without "Remote Wakeup"?

Is there anyone who has "Remote Wakeup" feature on your CMOS Setup as described on the manual?

Is there anyone who succeeds in "Wake on Lan" function solely with "Lan Option ROM" feature enabled?

Thanks in advance.

  • Tesla1856

    10 Wizard

    •

    18086 Posts

    •

    71947 Points

    1526

    0

    Posted December 29th, 2010 13:00

    It must be on always in BIOS because there is no option in BIOS to turn it off.

    The USB option is something else. You can try the "LAN Option ROM" option both ways, but I think that it is also for something else.

    WakeOnLan can be challenging to get working on any computer, but I have done it (but not specifically on my Aurora). I use it to wake my HTPC from a S3-Standby mode. The HTPC appears to be completely off and using almost no power, yet comes on completely in 5 seconds with MediaPortal already running.

    If you go into Control Panel/ Device Manager/ Network Adapters/ Broadcom NIC/ Properties/ Advanced you will see the controls. Also Power Management tab.

    You will need a program like this:

    http://www.depicus.com/wake-on-lan/what-is-wake-on-lan.aspx

    Dell Rockstar

    Microsoft Windows and Apple iOS Developer (Retired)
    - Like many of you, I can appreciate a good game-engine.
    - I answer questions here, but I'm not a Dell employee.
    - Consider giving posts you like a "thumbs-up"
    - Posting models-numbers and software versions speeds trouble-shooting.
    - Click "Mark as Accepted Answer" on any post that answers your question best.