I haven't made more progress than you -- but one thing I did notice is that Ubuntu fails to see the built-in hard drive (in my case a PCIe SSD). I can use the BIOS > Configuration > SATA to change the drive mode from "RAID ON" to "AHCI ON", and then linux sees the drive. Did you have this problem too?
Right struggled with this for awhile. Ubuntu installer and live CD doesn't see the SSD unless you go into AHCI mode, then everything installs fine even with Secure Boot and UEFI mode enabled. The problem is this breaks Windows, so I'm having trouble dual booting. Can't figure out how to get Windows 10 to use AHCI mode, and Ubuntu doesn't find the SSD in Raid On mode...
Other than that, everything in Ubuntu seemed to work fine so far other than Suspend/Resume which just crashes the computer. (and wifi of course but just get rid of the broadcom chip and install the intel 7265).
Would really love to get Ubuntu installed and working in Raid On mode if that's even possible. Otherwise would be good to get Windows working in AHCI mode.
If I can get this to work, I'll post a detailed step by step that explains how.
I can confirm that for the FHD version power management works (recover from supend) with Ubuntu 15.10 and Kernel 4.3 RC7, if that's something you want to add to your notes.
I just tried your instructions and they worked perfectly! I haven't used windows in a very long time, so I found the windows related instructions to be a bit vague, but not hard to figure out. Thanks for giving back!
Xps13-9350-user
1 Rookie
•
11 Posts
8800
0
Posted November 2nd, 2015 10:00
I haven't made more progress than you -- but one thing I did notice is that Ubuntu fails to see the built-in hard drive (in my case a PCIe SSD). I can use the BIOS > Configuration > SATA to change the drive mode from "RAID ON" to "AHCI ON", and then linux sees the drive. Did you have this problem too?