UNSOLVED

garrro02

updated

9 years ago

Closed

G

garrro02

8 Posts

0

10532

March 28th, 2018 08:00

Replacing HDD / Installing OS - Inspiron 11 3000 series

Had a problem with the old HDD and got replaced free of charge. After installing I didn’t realize I’d have to install the OS (Windows 10) but I figured it can’t be that hard.
For the life of me I can’t get the OS to install off a USB. A disc is not possible as there is no CD drive.
I keep getting an issue saying it can’t install on the partion selected even though there is room. I’ve tried deleting all of them to do a clean install but it is unable to delete them.

This conversation is no longer open for comments or replies and is no longer visible to community members.

  • ejn63

    12 Elder

    •

    31864 Posts

    •

    156337 Points

    10327

    0

    Posted March 28th, 2018 09:00

    Which specific model (i.e., Inspiron 3168, etc.)?  Was this a warranty replacement of the drive (in which case it should have come pre-imaged)?

     

  • Jesse L (retired)

    10 Wizard

    •

    17898 Posts

    •

    69016 Points

    10327

    0

    Posted March 28th, 2018 09:00

    garrro02,

    Click the link below to watch the video on installing Windows 10 using the USB Key.

    How to Install Windows 10 (using a USB key)

    Download Drivers from the link below. Choose your system and OS

    Support.dell.

    Drivers Help

    Driver Install Order

     

    Jesse L (retired)

  • garrro02

    8 Posts

    10344

    0

    Posted March 28th, 2018 09:00

    @jesse: I know how to install an OS the problem is it gives me an error while installing saying it’s unable to

    @ejn63: it was an under warranty replacement. However after installing it and turning the laptop back on it was taking forever to load and eventually popped with the dell diagnostics screen with an error saying no OS present and turned off
  • ejn63

    12 Elder

    •

    31864 Posts

    •

    156337 Points

    10340

    0

    Posted March 28th, 2018 10:00

    Where did the install media come from?  Did you have a backup from the original system made with the Dell backup utility, or did you download the ISO from Microsoft and use the media creation tool to prepare the flash drive?  Are you installing Windows 10-64 bit on the system?

    Again -- what model is this (Insprion 3168, 3142, etc.)?

    Checklist for setup:

    Legacy mode OFF

    Secure boot ON.

    I have a suspicion there's more wrong with the system than just the hard drive, but the answers to those questions plus the settings checklist is a start.

     

  • garrro02

    8 Posts

    10338

    0

    Posted March 28th, 2018 10:00

    Install Media came from windows creation tool.
    I’ve tried both 32 and 64.
    Inspiron 11 3168
    Currently running memory diagnostic tool
  • ejn63

    12 Elder

    •

    31864 Posts

    •

    156337 Points

    10326

    0

    Posted March 28th, 2018 11:00

    Does this system have a conventional 512G or 1 Tbyte hard drive, or a 32 G SSD?

     

  • garrro02

    8 Posts

    10329

    0

    Posted March 28th, 2018 11:00

    Tool didn’t find anything. Set the boot settings in BIOS and currently trying to install again.
    Got past copying Windows files which it hadn’t yet before. Currently seems stuck at getting files ready for installation (been on it a few mins and still at 0%)
  • garrro02

    8 Posts

    10311

    0

    Posted March 28th, 2018 16:00

    It has a 500GB HD.

    From some more messing around today now when the computer boots gets an error on the winload.efi file or bcd.

    I opened up command prompt from the repair computer area and tried the following from googling.
    I ran bootrec/fixmbr and returned:
    The request cannot be preformed because of an I/O device error.
    Then ran chkdsk/r and returned:
    The type of the file system is NTFS
    Cannot lock current drive
    Windows cannot run disk checking on this volume because it is right protected

    I noticed at this point that it was on drive X. I opened notepad and it’s called BOOT.

    Back in command prompt changed it to c: then ran the same two lines as before.
    Bootrec /fixmbr returned:
    The request cannot be preformed because of an I/O device error.
    Chkdsk/r returned:
    The type of the file system is RAW
    Cannot lock current drive
    CHKDSK is not available for RAW drives
  • garrro02

    8 Posts

    1703

    0

    Posted March 28th, 2018 16:00

    Thanks. Running now.
  • ejn63

    12 Elder

    •

    31864 Posts

    •

    156337 Points

    10309

    0

    Posted March 28th, 2018 16:00

    It's beginning to sound like your replacement drive is bad - that it has bad sectors on it.  That would explain the failure to boot from the factory image AND it would explain the current problems.

    Press F12 at powerup, boot to the Dell diagnostics and run an extended (not just quick - this will take a few hours) test on the drive. 

    My suspicion is that you'll find the drive has  bad sectors on it.