
UNSOLVED
M
manniongeo
5 Posts
1
816
January 31st, 2022 20:00
Inspiron 7500 broken Thuderbolt port after BIOS 1.6.0 update
I'm writing with a solution to a problem that I encountered today, in hopes that it will save someone else time and aggravation.
System: Inspiron 7500 2-in-1 Black
Issue: Thunderbolt port became non-functional after BIOS update 1.6.0
Solution: Downgrade to BIOS 1.5.0 > re-upgrade to BIOS 1.6.0
Details:
I had this machine connected to an external monitor via the Thunderbolt port. It had been working normally for 1+ month.
The Dell Update application notified me today that BIOS update 1.6.0 was available. I used that app to initiate the update. After rebooting, the update continued for several minutes while the Dell logo was showing on the screen (i.e. before booting the OS). Note that the external monitor was connected to the laptop throughout this process.
During that process, several hardware components had their firmware updated. I cannot remember them all, but one called "Main USB PD Controller 1" said that it failed. When the remaining components had finished updating - all of which said that they successfully updated along the way - the final message at the end of the BIOS update process indicated that it had failed overall.
After rebooting to Windows 10, I found the Thunderbolt port to be non-functional. The external monitor reported that it was not connected. Windows would not recognize any USB-C devices connected to the Thunderbolt port; there was no connection sound, and nothing new shown in Device Manager (even under "Other devices"). Additionally, external devices wouldn't charge off of the Thunderbolt port.
Attempting to reinstall BIOS update 1.6.0 several times (via .exe and .rcv files) reported success, but in each case it didn't not appear to actually try reinstalling the Main USB PD Controller 1 firmware. Instead, it reported that that component was already updated. The behavior was the same whether the external monitor was connected or disconnected. Applying various other chipset/firmware updates from the Dell Support site, including two with "Thunderbolt" in their name, did not fix the problem. Enabling everything in the BIOS with "Thunderbolt" in the name did not fix the problem.
Eventually, I downgraded the BIOS to 1.5.0. This caused various unrealted problems, and the Thunderbolt port continued to not work. When re-upgrading to BIOS 1.6.0, however, the Main USB PD Controller 1 component appeared to receive a "real" update - it took some time, a status bar gradually climbed to 100%, and a final message stated "Firmware update successful". After rebooting to the OS, the Thunderbolt port was functional again, and the external monitor worked normally.
Note that throughout this process, the external monitor and cable continued to work normally on a second Inspiron 7500 2-in-1 machine. Whatever the root cause, it was definitely specific to the problematic computer itself. Evidence suggests strongly that the BIOS 1.6.0 updater was at fault.
Hope this helps.
Responses (1)
Solutions (0)

manniongeo
5 Posts
365
0
Posted September 1st, 2022 07:00
The same problem occurred when upgrading to BIOS release 1.11.0. I again had to downgrade > re-upgrade to fix the issue - except just running the normal BIOS installers (.exe) as did not work.
On every attempt, the installer stated that the Main USB PD Controller 1 was already upgraded and did not actually do anything. Instead, I had to use the workflow described on this thread:
https://www.dell.com/community/Inspiron/BIOS-Update-1-18-1-breaks-USB-C/m-p/7891310/highlight/true#M119812
to force the BIOS installer to overwrite the Thunderbolt port firmware.