High temperature on Dell Inspiron G5 5000 CPU (i7 10700F)
Hello, since the last problem I faced passed some time and I recently started seeing another one. The thing is that when I am playing pretty demanding games, the computer CPU is reaching very high temps. I was playing Red Dead Redemption 2 when I wanted to just check my temps, specs usage and some stuff like that in alienware command center. I had 95-100 degrees celsius on CPU which is a high temperature as people say. GPU was doing in my opinion pretty okay with 75-80 degrees celsius. On idle the CPU is 40-55 degrees celsius. Specs in computer are original, nothing changed nor overclocked. The fans are running on 1200 rpm as hwmonitor says. I am bit worried if I should be playing such games since I don't want to break something in PC because I want to use it long term (4-5 years) not changing the pc in one or two years even though I have warranty. I am using balanced thermal plan in alienware cc and I am actually not looking to change it to performance because I tried it once (it was actually my previous problem) and I really don't want a jet turbine in my room. The programs I used to monitor all this were: Alienware Command Center, Speccy and HWMonitor PC specs are:
@RoHe Yes you are right, everyone should at least try to solve the problem by them self and then contact support. But I am really grateful for the support you guys are giving to me. I installed the intel driver & support assistance and only update I got was intel wireless bluetooth which I don't need so I am not going to install it. I will keep updating my firmware through the dell SupportAssist but I'll think about the thing you were saying about BIOS, even though I think that it's safe and actually you don't even need to update BIOS if everything is okay with the PC. At the moment I guess the problem is solved, I'll try to customize the fan curves best I can to not overheat I guess. The balanced thermal profile is really poor and can wreck PC if you don't notice it as an average user.
I have been thinking about this and I guess I am willing to change the thermal profile to performance which will be the "jet" sound as I mentioned but I can get used to it. I just don't know the cons of fast running fans so I can't tell if I would rather play with overheating computer or very loud computer. Sorry if some of my statements sound stupid but I am pretty much new in computers more like computer problems so I would appreciate your patience. And I want to mention that the computer has been used for around a month (I have been using it around a month, I own it for like 4 months, bought it and it was in garage until we moved to a new house).
Unfortunately the stock cooler Intel specs on the F series Comet Lake CPUs is just not proper for gaming or CPU intensive workloads.
The only solution is to install an aftermarket cooler. The good news is that there is a ton of information on this forum regarding what coolers fit and how to install them. I believe the CoolerMasters start at about 30 dollars which isn't too bad at all for the benefit they give.
After installing my Noctua my temps don't exceed low 70's in games like Cyberpunk where CPU utilization is high, and it's almost silent in comparison to the jet engine noise that comes from the tiny stock cooler.
If you're the least bit handy you can install one yourself. If you aren't sure any computer tech can do it for you, likely for under 50 dollars labour.
Consider it! It made using my machine much more enjoyable because it didn't sound like a dustbuster in the living room.
@J1mmyD33 Hey, thanks for reply. Well I was actually thinking that if there is some solution to consider as first, the easy one or free one, but if none works I could buy something like this. As I said in my reply there is this performance thermal profile in AWCC which you should get lower temps with but it would very very loud. I actually don't even know if there are even some negatives of fast spinning fans in long or short term. Do you have any experience with it? Because I don't want to go straight forward into paid solution.
If you're letting SupportAssist manage updates for you, I'd expect everything to be up-to-date...
You can always go to the Support page and put in your Service Tag (don't post it here). Then compare the version number for the drivers listed there with the driver version number for that component shown in Device Manager. Takes a little bit of time but, at least, you'll know if SupportAssist is doing its job.
Don't think it would hurt trying to install a driver if that same version is already installed. Worse/worse it re-installs or warns that the same version (or a
older
newer version) is already installed.
FWIW, I would not let SupportAssist run any firmware (BIOS) updates for you. IMO, it's too risky. If SupportAssist offers a new BIOS, just cancel it and download and install the update manually, without SupportAssist in the middle of such a critical update. Be sure to read/follow instructions to update BIOS on the support page for that update.
@RoHe Thanks for reply, no I am not sure if I do. I don't install such updates manually I let SupportAssist do it for me if there are any updates for something. Is there more of these necessary driver updates that I should have installed? I would love if you would send me them, thanks
@RoHe By the way, I just tried to install the Intel dynamic tuning driver and it says "The computer does not meet the minimum requirements for installing this software" thoughts??
shingling
1 Rookie
•
23 Posts
10763
1
Posted January 8th, 2021 12:00
@RoHe Yes you are right, everyone should at least try to solve the problem by them self and then contact support. But I am really grateful for the support you guys are giving to me. I installed the intel driver & support assistance and only update I got was intel wireless bluetooth which I don't need so I am not going to install it. I will keep updating my firmware through the dell SupportAssist but I'll think about the thing you were saying about BIOS, even though I think that it's safe and actually you don't even need to update BIOS if everything is okay with the PC. At the moment I guess the problem is solved, I'll try to customize the fan curves best I can to not overheat I guess. The balanced thermal profile is really poor and can wreck PC if you don't notice it as an average user.