UNSOLVED

gjouvenat

updated

19 years ago

G

gjouvenat

2 Posts

0

5557

June 9th, 2007 11:00

Monitoring a CX 300

Hello, I'm searching how I can monitor my CX 300. I want monitor some data like I/O of the CX, each fiber port... I'm using actually Nagios and Cacti. Tanks for your reply. Greg
  • Dennise458

    1 Rookie

    •

    101 Posts

    299

    0

    Posted June 11th, 2007 18:00

    EMC offers Navisphere Analyzer as an option that can be installed on the array to monitor IO on the array. It can monitor a wide variety of performance related parameters.

    With Navisphere release 24 and the optional Navisphere Analyzer you can set it up to automatically capture performance reports for review at your convenience.
  • sdcarroll

    1 Rookie

    •

    60 Posts

    299

    0

    Posted July 22nd, 2007 19:00

    Does your fiber switch support SNMP? Each port can show IO just as easily as querying the server and/or the SAN.
  • laoise87

    6 Posts

    299

    0

    Posted July 31st, 2007 20:00

    If you go into Navisphere Manager and right click your CX300 and select properties them you can enable statistics login.
     
    Then right click first SPA and select Properties go into the the STATISTICs tab and after a few minutes you will see some statistics.
     
    Don´t forget to unselect the statistics because it is not really good to have it all time on.
     
    Other tool you can use is the IOMETER.  Run it from one of the Server connected to the SAN and with one or many LUNs assigned.
     
    Hope this help.
     
    Laoise