kingfisherfox

updated

2 years ago

K

kingfisherfox

1 Rookie

•

3 Posts

•

2 Points

0

953

August 4th, 2024 06:42

Dell R630 server bios update failing not sure what to do?

Hi all, 

I purchased an older Dell R630, and it was fine for a while but had a failing CPU, so I wanted to update. I added some to the system that I checked were supposed by the hardware, but it seems that the Bios needs updating, and that is where it all falls over. 


It's a PowerEdge r630
Bios is crruenty 1.3.5
firmware version 2.15.10.10
Lifecycle controller firmware 2.15.10.10


Hardware: 
CPU 1 -  Intel(R) Xeon(R) CPU E5-2680 v3 @ 2.50GHz.  
DIMM A1/A2/A3 - DDR-4 X 16gb


From what I can tell, I'm getting the right bios; I'm uploading it from my Mac over the network, and it goes to the job, but then it fails. 



I really don't know what steps to take to get this solved, its all new to me..

  • kingfisherfox

    1 Rookie

    •

    3 Posts

    •

    2 Points

    0

    0

    Posted August 6th, 2024 16:59

    @DELL-Joey C​ 

    This is an update and info for anyone else in the same situation. 

    The R630 had no os on it, and was only running Unraid via USB. 

    1 - I downloaded and flashed ubuntu server 
    2 - Put the USB into the front panel, set the boot order to use the new USB and installed ubuntu server. 
    3 - I was then able to ssh into the machine and start the process of manually updating the bios versions one by one. 
    4 - If you hit an issue that bios update is installing but after reboot, you need to make sure that your Idrac/Lifecycle controller is updated to the most recent version. 
    5 - Then you can start adding them again, one at a time, and the system will cycle through the lifecycle install wizard for each one. 

    While painful doing it one at a time, this issue is now on the way to being solved, and getting to the most recent version. 


    Everyone, thanks for your assistance. 

  • DELL-Young E

    Moderator

    •

    5421 Posts

    •

    37 Points

    0

    0

    Posted August 4th, 2024 22:59

    Hello thanks for choosing Dell and welcome to our community

     

    This may help:

     

    To update a Dell server's BIOS using iDRAC9, you can try these steps:
    1 Download the update files from https://dell.to/3WN9DWu to your local machine
    2 Log in to iDRAC
    3 Click Maintenance, then System Update
    4 Click Browse
    5 Select the update file, then click Upload
    6 Expand the update details to view the current and available versions
    7 Select the update to install
    8 For updates that don't require a reboot, select Install
    9 For updates that do require a reboot, select Install and Reboot or Install Next Reboot
    10 Open the job queue to monitor the progress of the update

     

    Respectfully,

    Social Media and Communities Professional

    Dell Technologies | Enterprise Support Services

    #IWork4Dell

    Did I answer your query? Please click on ‘Mark as Accepted Answer’. ‘Thumbs up’ the posts you like!

  • kingfisherfox

    1 Rookie

    •

    3 Posts

    •

    2 Points

    0

    0

    Posted August 5th, 2024 08:33

    So, do exactly what I posted that I was doing, and getting the failure? 

    AS that is what I was doing 
    getting files 
    going into idrac, uploading them, 
    getting an error that it wasn't able to download , even though I had just uploaded.


    BUT I didn't mention I was using idrac 8 though  

  • DELL-Joey C

    Moderator

    •

    4170 Posts

    •

    20965 Points

    0

    0

    Posted August 5th, 2024 09:42

    Hi,

     

    If you'e on iDRAC/LCC version 2.15.10.10, the iDRAC is not capable to use .exe file to update firmware. 

     

    My opinion to update the BIOS is via the OS DUP, and I don't recommend updating the BIOS straight from 1.3.5 to 2.19. Please try a lower version, say 2.0.1. I usually recommend users to update firmware in stages. 

    DELL-Joey C

    Social Media and Communities Professional

    Dell Technologies | Enterprise Support Services

    #IWork4Dell

    Did I answer your query? Please click on ‘Mark as Accepted Answer’ if I did.