SC4020 SSD drives come up as unclassified, but product code is in disk file
Hi,
I have Write Intensive SSD drives (LB806M) I am trying to manage. They worked in another SC4020. They come up as unclassified now. I could not manage a classified disk.
The product code for the drive IS in the drives txt file. But, when I do “disk association show” the product code is not in the table list for some reason. It’s not reading the disk file?
When I try to do “disk association create” with all the values, it will not let me and says "system write only".
I was able to do a “disk set 1 Class 6” on the drives and then they were classified correctly, but manage still fails and says “Unable to create speedzones DiskClassAssociation not found”
Any help is VERY appreciated with getting these drives usable! Thanks!
For anyone else that is having this kind of trouble, I hope I save you a headache and many hours of troubleshooting… because there sure is very little troubleshooting information out there on these systems.
I knew the SSD disks should be working with the product code in the disk file I found in the root file system. The command “disk association show” lists the drive products table that SC has knowledge of and can classify, if it has the drives in the chassis. The product code was not listed in this table when I tried this.
I found that the pstart.xml file is a vital configuration file and should not be deleted during the reset procedure mentioned in:
I am lucky I renamed the file and did not delete it. I found it strange after setting up the controller, the file was never recreated. I renamed the file back to pstart.xml and the system was aware of the disk file, and was loaded into the configuration. Drives were classified and now work!
Reading the pstart.xml file, it appears to have details on file locations and firmware data from updates. I did not have any problem with any old configuration data being in that file when going through the CS startup wizard after prejoin was finished.
If you have support and you can update the system, deleting the file may be ok, and it might be recreated after you update.
DELL-Sam L
Community Manager
•
8147 Posts
•
34706 Points
1758
0
Posted May 7th, 2018 11:00
Hello D_ray,
With this issue, I would call into support so that we can look at the logs of your SCv4020 to see what is going on as with your WI drives .
Please let us know if you have any other questions.