However, when we follow the instruction as mentioned in emc99876 to restart Navispher Manager (URL -
http://168.x.x.10/setup.html), we get the following error message:
Navi Error. Access Denied. Please check the typed URL. We have tried
https://168.x.x.10/setup.html as well but get the same message.
Are you receiving the error when trying to access the page or when you try to log in? If you receive the error when logging in, you need to use a global admin account. If you receive the error when try to access the web page, you may have a problem with you network access.
Probably need to open a case with EMC - there is a way to directly access the SP from the Management Station and restart the management server. What type of array and what is the code level?
Can you still access the array using SPB IP address?
kelleg
6 Operator
•
4537 Posts
979
0
Posted January 21st, 2008 09:00
If so, then I would suggest opening a case with EMC - there should not be any difference when accessing start or setup page.
Try just putting in the IP address and /setup:
ex. 192.168.1.1/setup
regards,
glen kelley