Have you tried "destroyed security" from http://192.168.1.1/setup? With this you will be able to define new username and password. To perform this you need to have a PPP connection via serial interface card then use browser with http://192.168.1.1/setup.
If you loss/forget the Navisphere password, the only way is to have a CE access the array from the Clariion serial port using their service laptop. They will access the array and log in using the service passwords. Once there they can reset the domain sercurity and passwords. Then you access the array normally and go through the process of setting up a domain and entering the usernames/passwords.
In oder to access the IP_Address/setup page, you need the username/password to log in. Without the password, you can't get in to reset Domain Security. You must use the SP serial port.
Allen Ward
6 Operator
•
2124 Posts
983
0
Posted January 4th, 2007 08:00
Do you have ANY access to the array? Have you tried the original Administrator account with the default password to get in?