UNSOLVED

bigs77

updated

15 years ago

B

bigs77

6 Posts

0

3105

October 26th, 2011 23:00

AX4i iscsi Event Number 720e

We have an AX4i and receive intermittant email messages with event number 720e

We have 2 x NICs directly run to SPA and SPB with no switch involved.  We have Powerparth 5.5 installed and have 2008R2 installed on the server. 

As such i don't believe it to be network congestion due to the connections being physically different network segments and different subnets.

These are the only errors we are receiving and since this is a product environment is leaving us more than a little concerned.

  • Parks2

    116 Posts

    1087

    1

    Posted October 31st, 2011 12:00

    I suggest running an EMC Report and submit it to HEAT .. Maybe hba drivers, firmware or flarecode needs to be upgraded

  • bigs77

    6 Posts

    1087

    0

    Posted October 31st, 2011 23:00

    Hi Parks,

    Thanks for the suggestion.  Can you advise on how I might do this (I am very new to the whole EMC world).  I assume the Report you refer to is the Generate diagnostic files in the web interface or is this using the navisphere express application?

    Amd secpmd;u who is HEAT?  and how do I submit to HEAT?

    Thanks in advance

  • Roger_Wu

    6 Operator

    •

    4025 Posts

    1087

    1

    Posted November 1st, 2011 00:00

    You can download the latest EMCReports from http://powerlink.emc.com at Home > Support > Product and Diagnostic Tools > Grab Utilities, note the different versions for different versions of Microsoft Windows. Once the information has been collected, then submit it to HEAT via Home > Support > Product and Diagnostic Tools > Environment Analysis Tools > Host Environment Analysis Tool (HEAT),

    Hope it will help you.

  • bigs77

    6 Posts

    1087

    0

    Posted November 1st, 2011 04:00

    Turns out I only have limited version of powerlink support, i'll be contacting emc tomorrow to try and get more access so i can do this and will let you know how i get on.

    Thanks again for the assistance so far

  • SKT2

    2 Intern

    •

    1340 Posts

    1087

    1

    Posted November 6th, 2011 06:00

    EMC Grab and EMCReports utilities can be downloaded from the following locations: From FTP: • For UNIX hosts such as (AIX, HP-UX, Linux, Solaris, Tru64) ftp://ftp.emc.com/pub/emcgrab/Unix/   • For ESX hosts  ftp://ftp.emc.com/pub/emcgrab/ESX/   • For Windows hosts  ftp://ftp.emc.com/pub/emcgrab/Windows/   • For Open VMS hosts  ftp://ftp.emc.com/pub/emcgrab/vms/

  • christopher_ime

    6 Operator

    •

    1962 Posts

    1087

    0

    Posted November 9th, 2011 03:00

    I simply wanted to add one more direct link for our grab utilities to complete the list above.

    ftp://ftp.emc.com/pub/emcgrab/ESXi/

  • kelleg

    6 Operator

    •

    4537 Posts

    1087

    0

    Posted November 10th, 2011 13:00

    Please remember to mark your question as Answered when you get the correct solution.

    glen

  • bigs77

    6 Posts

    1087

    0

    Posted November 10th, 2011 15:00

    Thanks for the suggestsions so far I'm sure this is what I need to do however I am still waiting on EMC to upgrade my account so I can get to the powerlink site, as soon as I have this access and can submit the logs I'll post the response in here.

  • bigs77

    6 Posts

    1087

    0

    Posted December 14th, 2011 18:00

    I have finally been able to run the tool and submit it however the HEAT has now been replaced by E-Lab advisor.  It identified a few things such as services that aren't running that should be but nothing that jumped out at me as critical.  I have now logged a case with support and will update the forum as soon as I hear more from the support team.