UNSOLVED

Ronster253

updated

4 years ago

R

Ronster253

1 Rookie

•

31 Posts

0

424

February 6th, 2023 22:00

m17 R2, Right Side WLAN Card / USB Ports IO circuit board replacement

Hello Community! Could someone with knowledge of this particular m17 R2 USB Ports IO circuit board (a.k.a. daughter board) please explain to me the correct and safest steps to uninstall defective circuit board and the correct steps to reinstall new circuit board?  Thank you in advance for your time and assistance in regards to this matter. I appreciate the help very much!

 

  • crimsom

    9 Technologist

    •

    6114 Posts

    253

    1

    Posted February 7th, 2023 01:00

    Hi @Ronster253 welcome to this free user-to-user Alienware laptop discussion forum. 

    Dell Alienware m17 R2 Right Side WLAN Card / USB Ports IO Circuit Board - Killer 1650 is Dell P/N THCRT. 

    Support for Alienware m17 R2 Documentation includes Service Manual with the Right I/O-board Remove & Install process. There are also many YouTube videos such as Alienware M17 R2 System Board Replacement Dell Australia - YouTube. There could be a Dell Support or Alienware Support YouTube video, but the Dell documentation does not include this link. 


    [This user does not work for Dell and volunteers their free time. Please remember to say thank you by clicking on my thumb up icon.]

  • Ronster253

    1 Rookie

    •

    31 Posts

    215

    1

    Posted February 24th, 2023 11:00

    Hi @crimsom thank you for those links. I appreciate it. So just to give you the main issue I'm having...I had removed this particular circuit board (not realizing I didn't have to) while preparing to apply new thermal paste to my cpu and gpu. This "daughter" board was working fine before I removed it, but after applying the paste and reassembling everything, the USB ports on this daughter board wouldn't work...even after uninstalling/reinstalling drivers. Figuring I may not have been properly grounded at the time of removing the daughter board and possibly damaging it, I recently purchased a new Right Side WLAN Card / USB Ports IO Circuit Board - Killer 1650. Before replacing the old daughter board with this new one, I made sure myself and work area were properly grounded this time, even wearing an anti-static wristband which was also properly grounded. Well, the USB ports "still" aren't working even with this new daughter board installed and drivers reinstalled. It was then recommended I check to see if it's software or hardware related, so I put my Windows 10 image on a USB thumb drive via Microsoft Media Creation Tool then tried booting from this USB drive inserted into both Right Side USB Ports but neither of them worked. (Side note: This new daughter board was tested by the business I purchased it from prior to them sending it to me, as is their policy). Also, the Killer 1650 WLAN Card on this circuit board works just fine. I'm currently on my Alienware M17 R2 typing this and connected to my home Wi-Fi and I haven't had any issues with the WLAN Card on this newly purchased daughter board....just the USB ports that are also a part of this board. So if it's not the circuit board or software related (far as I know) then what else could it be?

    I'm not sure what to do next in troubleshooting the problem but I am always appreciative of your feedback and/or recommendations @crimsom as well as of those in this knowledgeable community too. Thank you!

  • crimsom

    9 Technologist

    •

    6114 Posts

    213

    1

    Posted February 24th, 2023 12:00

    Hi @Ronster253 

    Please try to improve/debug the Windows operating system using my Windows PowerShell post in Alienware m17 R3. Screen flickering and occasionally going black whilst awake - Dell Community. 


    [This user does not work for Dell and volunteers their free time. Please remember to say thank you by clicking on my thumb up icon.]

  • Ronster253

    1 Rookie

    •

    31 Posts

    204

    0

    Posted February 25th, 2023 01:00

    Hi @crimsom

    I followed all of the steps in the link you sent me above (Alienware m17-R3-screen-flickering-occasionally-going-black-whilst-awake) and Malwarebytes found nothing. Also, there were absolutely no errors and/or corrupt files reported through either Reliability Monitor, chkdsk c: /r, chkdsk logs, DISM /Online /Cleanup-Image /RestoreHealth or sfc /scannow. Just nothing to indicate what could be causing the right side USB ports to not work on this new daughter board I recently purchased and installed. But thank you again for your help! Much appreciated @crimsom. My troubleshooting this issue continues. Any other recommendations or possible fixes/solutions would also be greatly appreciated from anyone in the Dell Alienware M17 R2 community. Thank you in advance!