"32 GB, 2 x 16 GB, DDR5, 5600 MT/s, dual-channel" is listed as a valid memory configuration (if you're asking 32GB total).
However, if you're asking about 64GB total from two 32GB modules, the Dell spec indicates "64 GB, 2 x 32 GB, DDR5, 5200 MT/s, dual-channel" as a valid configuration. Why 5200, not 5600 -- is that a system limitation, or was that the norm for 32GB modules at the time? (It would be nice if the spec were a little more chatty about the whys and wherefores of such nuance...)
Either way, https://www.crucial.com/memory/ddr5/CT32G52C42S5 suggests upgrading to the later/faster module now anyway, so perhaps the only remaining question is whether the system can take full advantage of that speed?
I posted this on Reddit as well, and someone mentioned that updating to the latest BIOS could help, but they were referring to their Alienware M18 R2. Also could you help me find the latest BIOS update for the Alienware M16 R1?
Manually searching for available drivers for M16 R1 (via "Find Drivers" below the option for automatic search) shows that the latest available BIOS firmware is 1.22.1, which was released just about a month ago and which addresses the Dell Security Advisories (DSA). Again, its note cautions that you can't revert to an older BIOS after installing this security-driven update.
That same description offers a history of previous BIOS versions, through which you can search for mention of making higher access speeds available for RAM (as your Reddit poster alluded).
(https://www.dell.com/community/en/conversations/alienware/laptop-bios-update-instructions/64fe4a181b394e5279f09d80 cautions that BIOS updates should be done soberly and with firm rationale, due to the unlikely but extremely unhappy possibility of rendering the machine useless if something happens amiss during the update.)
Since I don't have an M16 R1, I followed the "Find Drivers" link below the automatic-update section, where I found that the latest BIOS firmware is version 1.22.1, which was released on November 12th 2024 to address the Dell Security Advisories (DSA). Again, its accompany note is, well, noteworthy: once that BIOS update is installed, you can't revert to an earlier version.
There is also a link to the previous releases of the BIOS firmware, further detailing what changes were included in them. You can look through those to see if anything resembles what your Reddit poster suggested regarding support of higher-speed RAM.
I posted two other replies that apparently got lost, even after telling me that they were created successfully... apologies if they all show up together at some future time...
(https://www.dell.com/community/en/conversations/alienware/laptop-bios-update-instructions/64fe4a181b394e5279f09d80 cautions that BIOS updates should be done soberly and with firm rationale, due to the unlikely but extremely unhappy possibility of rendering the machine useless if something happens amiss during the update.)
Since I don't have an M16 R1, I followed the "Find Drivers" link below the automatic-update section, where I found that the latest BIOS firmware is version 1.22.1, which was released on November 12th 2024 to address the Dell Security Advisories (DSA). Again, its accompany note is, well, noteworthy: once that BIOS update is installed, you can't revert to an earlier version.
There is also a link to the previous releases of the BIOS firmware, further detailing what changes were included in them. You can look through those to see if anything resembles what your Reddit poster suggested regarding support of higher-speed RAM.
OnMyPlanet
1 Rookie
•
9 Posts
•
2 Points
0
0
Posted December 11th, 2024 00:39
Just looking at the specs, I share your uncertainty...
https://www.dell.com/support/manuals/en-us/alienware-m16-r1-laptop/alienware-m16-r1-setup-and-specifications/memory?guid=guid-e9d2ea83-38a4-431d-803c-96d63c1dbc34&lang=en-us
"32 GB, 2 x 16 GB, DDR5, 5600 MT/s, dual-channel" is listed as a valid memory configuration (if you're asking 32GB total).
However, if you're asking about 64GB total from two 32GB modules, the Dell spec indicates "64 GB, 2 x 32 GB, DDR5, 5200 MT/s, dual-channel" as a valid configuration. Why 5200, not 5600 -- is that a system limitation, or was that the norm for 32GB modules at the time? (It would be nice if the spec were a little more chatty about the whys and wherefores of such nuance...)
Either way, https://www.crucial.com/memory/ddr5/CT32G52C42S5 suggests upgrading to the later/faster module now anyway, so perhaps the only remaining question is whether the system can take full advantage of that speed?