The Setup and Specifications document for that system available on support.dell.com says the system has two M.2 2280 slots for storage, and they support NVMe. The document says the maximum capacity is 1TB, but that is very often NOT accurate. When Dell quotes maximum capacity, it's typically based on the maximum they actually tested or the maximum they sold with the system from the factory. There are MANY cases of users installing SSDs with higher capacity than the quoted spec and having no problems at all.
So yes, running two 2TB SSDs should be fine. And if you want them to appear as two separate 2TB disks, you can just install the second SSD and you'll be fine. But if you want your two 2TB SSDs to appear as a single 4TB virtual disk, you'd need to set up a RAID 0, and doing that would typically wipe the existing contents of the SSDs. Some server RAID controllers offer a way to perform an in-place conversion from a single disk to a RAID 0, but I haven't seen that on laptops, so you might have to reinstalling Windows and your applications from scratch if you want a RAID 0.
hey so i just got a Samsung 970 pro NVMe m.2 SSD for my Alienware Area 51-m, and it doesn't recognize the SSD... how did you get the computer to recognize the SSD? it shows in samsung magician but if you click on the "updates" tab there's no possible updates. it's showing up right now as a dvd drive.
@Captain Newo It's probably because your system is in RAID mode, and in order for Samsung Magician to work properly (and if you want to use Samsung's NVMe driver, which is optional), you need the system to be in AHCI mode. You should be able to change this in your BIOS Setup, but normally this setting is changed before you install an OS, because if you have an OS set up while the system was in one mode and you switch it, that OS environment won't be bootable anymore. I've read that if you change that setting and then boot into Safe Mode once, then you'll be able to reboot normally and it will be fine. But make sure you know how to boot into Safe Mode before you try that. After that Samsung Magician should work.
Hey bro I’m new to the gaming pc world but I have a question.. I bought the evo 2tb 970 Samsung SSD but what happens when I switch the 512gb SSD that the computer came with with the new SSD I purchased ?.. do I lose all my storage when I swap it ?
Hi there. this may sound too late but i just bought samsung 980 pro m.2 ssd and installed on my a51 r1 laptop then i noticed that theres no heatsink when check the the box, can u send the link for the heat sink that u used? tyvm in advance.
jphughan
11 Legend
•
13985 Posts
•
79931 Points
2770
0
Posted April 29th, 2020 15:00
The Setup and Specifications document for that system available on support.dell.com says the system has two M.2 2280 slots for storage, and they support NVMe. The document says the maximum capacity is 1TB, but that is very often NOT accurate. When Dell quotes maximum capacity, it's typically based on the maximum they actually tested or the maximum they sold with the system from the factory. There are MANY cases of users installing SSDs with higher capacity than the quoted spec and having no problems at all.
So yes, running two 2TB SSDs should be fine. And if you want them to appear as two separate 2TB disks, you can just install the second SSD and you'll be fine. But if you want your two 2TB SSDs to appear as a single 4TB virtual disk, you'd need to set up a RAID 0, and doing that would typically wipe the existing contents of the SSDs. Some server RAID controllers offer a way to perform an in-place conversion from a single disk to a RAID 0, but I haven't seen that on laptops, so you might have to reinstalling Windows and your applications from scratch if you want a RAID 0.