UNSOLVED

_OCB

updated

8 years ago

Closed

_

_OCB

1 Rookie

•

28 Posts

1

3878

July 28th, 2018 04:00

Alienware 15 R4 Command Center Bugs

I'm having 3 different problems with Alienware Command Center 5.1.27.0.

1) The power button light can't be customized in any way. There are only 7 items in the AlienFX screen, but the power button is labeled as number 8. This seems to be the cause of the problem.

2) The power button light will remain off when the "Go Dark" option is selected. This occurs when the system is shut down or restarted. After this, the power button light will remain off, even when "Go Dark" is deselected. However, all the other lights turn on again.

3) Custom fan profile settings are ignored completely. They have no effect on the fan speed at any CPU temperature.

Hopefully someone has a solution to these problems.

Things I've tried so far:

- Uninstalling and reinstalling Alienware Command Center

- Choosing the "repair" option in Windows 10 Apps and features in Settings.

This conversation is no longer open for comments or replies and is no longer visible to community members.

  • obzerving

    14 Posts

    3538

    0

    Posted July 29th, 2018 10:00

    I can confirm that I've experienced the same things you described with my AW 15 R4. I had to uninstall and reinstall command center to get the power switch to light up again.

  • BonesB

    1 Rookie

    •

    83 Posts

    3521

    0

    Posted July 30th, 2018 13:00

    Hi. I dont think its a bug i think its just a bad interface. If you click on the number 8 that points to the power button you should be able to change it. (dont click on the power button, nothing will happen)

    Awful piece of software!.

  • obzerving

    14 Posts

    3512

    0

    Posted July 30th, 2018 17:00

    I can't speak for _OCB, but I was aware that clicking on the 8 gives you the opportunity to change the power switch lighting. The problem is that the changes didn't actually affect the power switch light.

  • BonesB

    1 Rookie

    •

    83 Posts

    3486

    0

    Posted July 31st, 2018 13:00

    After clicking the 8 and making the change, are you saving the theme?
    Because all the other lit areas change immediately when you click and change them. The power switch will not change until you have saved the theme.
  • obzerving

    14 Posts

    3478

    0

    Posted July 31st, 2018 18:00

    I clicked the save button before leaving the page. BonesB ,  you haven't said whether you have a 15 R4 and are not experiencing this particular issue with version 5.1.27.0 of the Command Center.

  • BonesB

    1 Rookie

    •

    83 Posts

    3453

    1

    Posted August 2nd, 2018 03:00

    I have a 17 R5 but i did have a 17 R4 which probably had the same software. So just going by memory really.

    Its a really horrible piece of software.

  • _OCB

    1 Rookie

    •

    28 Posts

    3435

    0

    Posted August 3rd, 2018 00:00


    @BonesB wrote:
    After clicking the 8 and making the change, are you saving the theme?
    Because all the other lit areas change immediately when you click and change them. The power switch will not change until you have saved the theme.

     

    Ok on the 15 R4 this doesn't work. I tried to change it by clicking the 8, making changes to the color, and then saving the theme. Unfortunately, nothing happens. It stays exactly the same. This means that the actual settings are not being updated. It's also possible that it's a bug in the firmware for the lighting control chip.

    I actually had the 17 R4 before I got the 15 R4, and the 17 didn't have any of these issues. The command center worked a lot better on the previous gen. Dell has improved a lot and I think their support is very good now. But as a programmer, I am very disappointed when they release software like this. I wish I had the source code so I could fix it myself.

  • BonesB

    1 Rookie

    •

    83 Posts

    3431

    0

    Posted August 3rd, 2018 01:00

    So if you are using the R4 are your lighting profiles being saved in your "my documents alienware command center" folder?

    Just interested to see if they are actually being saved somewhere.

  • obzerving

    14 Posts

    3413

    0

    Posted August 3rd, 2018 13:00

    I do have a 15 R4. I checked the Documents (there is no "My Documents") folder and didn't see anything similar to alienware command center in it. However, I did see something similar in C:\ProgramData\Alienware\Alienware Command Center. There is a folder named FXMetadata with a few json files in it. By the way, I am now on version 5.2.0.0 of Command Center and the problem persists.

  • BonesB

    1 Rookie

    •

    83 Posts

    707

    0

    Posted August 6th, 2018 12:00

    Lol been using computers for so long now, didn'tnotice they changed my documents to just documents.

    I actually cant get version DHRVN_WIN_5.2.0.0_A00 to install. Also i dont have the Alienware folder in ProgramData.

    kinda lost now.  I'm pretty sure the profiles are being stored on a seperate chip. When you install the new AWCC the software flashes the chip.

    Have Dell not given you any help?.