Hello! Another OC problem! I have one of the models that has the 5900 non X variant and have tried two sets of Corsair Vengeance LPX memory. The issue I have is that with either the OC1 or OC2 option enabled I get the three boot then default error. The ram in question right now is CMX16GX4M2B3200C16 in a 4x8GB configuration. Trying to boot into the xmp profile of 3200 XMP is NOT working. I noticed manual timing settings in the bios however the tags do not correlate or match visually to me. Again this is a 4x8GB configuration. AWCC doesn't correctly read the ram and thus I do not have a software side XMP option.
Corsair Vengeance LPX was never tested/validated by Dell. Also, 4x8GB was never tested/validated by Dell. We tested/validated 2x16GB 3200MHz and 2x16GB 3400MHz.
* Go back to the top of this Alienware Desktops board * Open FAQ Alienware Desktops * Open FAQ Aurora R10 * See = Validated OEM (original equipment manufacturer) memory
Hello, I think I'm having a similar situation with my Aurora R14 Ryzen 9 5900 (non-x). I took some advice that I should've researched a little more.
This Pc came with the Fury 32gb RAM. I was told I probably didn't need more but better RAM. So, I ordered the Corsair Vengeance LPX 2x16. Using the AWCC it doesn't give me an option for RAM anymore. In the BIOS it only gives 2 options- Auto or Custom. I can choose either, but when I choose custom, I must enter the timings and I'm not confident enough to do so. So, if you could give me some professional advice, I would appreciate it. If you need my service tag or anything else, please DM me. Thank you
JohnnyRamone
1 Rookie
•
118 Posts
2046
0
Posted April 25th, 2022 12:00
2x16GB 3466MHz is the fastest OEM memory for the R10 Ryzen Edition with 5900 Ryzen you can buy from Dell (tested and validated by Dell).
