I have xps 13 9370 and a dell monitor with HDMI cable. When I switch the mode to "Extend", the screen on the monitor goes blue with Windows logo and I can see the task bar at the bottom but nothing else. I cannot see my cursor. I have to revert back to "mirror" mode.
Sounds like Dell monitor is Primary Monitor when connected.
You "Extend" it and set laptop's display to "Make this my Main Display".
Dell Rockstar
Microsoft Windows and Apple iOS Developer (Retired) - Like many of you, I can appreciate a good game-engine. - I answer questions here, but I'm not a Dell employee. - Consider giving posts you like a "thumbs-up" - Posting models-numbers and software versions speeds trouble-shooting. - Click "Mark as Accepted Answer" on any post that answers your question best.
Thank you for the reply. When I select "Extend it" the "Make this my Main Display" gets selected automatically and the problem stills persists. I can use the function "show on 1 or 2" with no problem,
@shellysohal A blue background with a Windows logo and a taskbar sounds exactly like what a non-primary display should look like in an Extend mode configuration before you move any applications over there. Have you ever used dual displays in Extend mode before? You don't get a cursor on each display. If your cursor is on the other display, you need to move it off the correct edge of that display to get it over onto that other display.
If you check Windows Display Settings after switching to Extend mode, you should see two displays in the diagram above all the settings. If you click Identify, you'll see large numbers temporarily appear on each of your displays. So for example let's say your laptop's built-in display shows as #1 and your external display shows a "2". Those numbers corresponds to the numbers in the diagram shown in Windows Display Settings. So if the diagram shows #1 on the left and #2 on the right, then you should be able to move your mouse cursor off the right edge of your laptop's built-in display to bring it over to your external display. And you can also then drag applications over there the same way. If the diagram's layout doesn't match the physical layout of your displays, then drag the displays in the diagram to match how you've physically set up your desk.
Tesla1856
10 Wizard
•
18086 Posts
•
71947 Points
641
0
Posted September 16th, 2021 21:00
Sounds like Dell monitor is Primary Monitor when connected.
You "Extend" it and set laptop's display to "Make this my Main Display".
Dell Rockstar
Microsoft Windows and Apple iOS Developer (Retired)
- Like many of you, I can appreciate a good game-engine.
- I answer questions here, but I'm not a Dell employee.
- Consider giving posts you like a "thumbs-up"
- Posting models-numbers and software versions speeds trouble-shooting.
- Click "Mark as Accepted Answer" on any post that answers your question best.