The fingerprint on my laptop was working flawlessly until some major update of windows. Now I cannot setup the fingerprint again.
The last Goodix driver Version 2.1.31.300 is installed but when I try to setup the fingerprint at the moment where it says "Touch the fingerprint sensor, Repeatedly lift and rest your finger on the sensor until setup is complete" and put the finger on the sensor nothing happens. So it seems the fingerprint sensor is not working. On the BIOS V1.4 I checked that the biometric device is enabled.
Hi, Go to BIOS Settings and check: Software Guard Extensions(SGX) set to "Software Controlled", save settings and reboot. This should solve your problem.
I don't know but for my Dell XPS 9380 I first erased my fingerprint and tried to add a new one but that did not work so I reinstalled the Goodix drivers and that fixed the issue temporarily. When I rebooted, the issue reappeared and what seems to fix it permanently is changing the BIOS setting "Intel Software Guard Extensions (SGX)" to "Software Controlled" from "Enabled".
having same issue since update. did not find the link from the Dell person helpful as it has several in-depth articles for troubleshooting, and nothing specific to this update. What's the best way to get help from Dell?
Is dell actually active on this forum? Multiple users reported a non functioning finger print scanner and so far still no word or fix from dell... Did i have to pay extra for customer service?
I've got a Dell XPS 13 9360. I too have not had problems with the fingerprint reader until the last 2 weeks or so. I cant pin point cause. It is working intermittently. Went in to reset up the fingerprint reader and my print was recognized there. The knowledge base articles are not useful for this problem.
I am having a problem that might be related but with somewhat different symptoms. I too had had no problems with the fingerprint reader until recently. I believe the problem started after an Win 10 upgrade. My fingerprint reader still works perfectly when I wake up the laptop after relatively short periods. However, if I reboot or am away from the laptop long enough for it to go to sleep, I have to use my password or PIN to get past the lock screen. The fingerprint reader does not seem to be operational at all in those situations (that is, I don't get messages like the fingerprint is not recognized - there's just nothing).
It's odd because obviously the reader and my fingerprint are OK as it works for waking up from short duration locks. Is there a setting that controls whether the fingerprint can be used for startup from a boot or sleep condition?
pmiguelfgv
1 Message
69821
6
Posted November 23rd, 2018 15:00
Hi, Go to BIOS Settings and check: Software Guard Extensions(SGX) set to "Software Controlled", save settings and reboot. This should solve your problem.