The PCI Status Test: DW-0 DriverError warning is generally related to a device driver communication issue detected during the scan and does not typically indicate a hardware failure.
We recommend checking Device Manager for any devices showing a warning icon (yellow exclamation mark). If any are found, update or reinstall the affected driver, restart the system, and then rerun the SupportAssist Hardware Scan.
If no driver issues are present and the warning continues to appear, this may be a known false-positive result that can occur even when the system hardware is functioning normally.
Our engineering team has identified this behavior and is working on improvements for a future SupportAssist release.
The “PCI Status Tests : DW‑0 – Driver Error” message is a SupportAssist diagnostic flag, not a traditional hardware failure code.
In practice it means SupportAssist detected something unusual about a PCI/PCIe device’s driver or configuration, but it often turns out to be informational only and safe to ignore if the system is otherwise stable.
Hi
Not necessarily safe to ignore, but maybe try and update some firmware/drivers and see if thatmakes a difference.
@DELL-Nat M Thank you for the update. I have checked the Device Manager and can see no errors or warnings. I now must assume that the error warning was a "false positive". I look forward to an update of SupportAssist to correct the message error.
I have an Alienware Aurora R12 and get the same Dell Support Assist callout. My Device Manager shows no issues. Software and drivers are latest according Dell Support Assist hardware analysis. I have no noticeable problems with my desktop's drives or PCI Bus.
If this is a Dell diagnostic anomaly, they have not fixed it. False Dell Assist error reports do not give me confidence this tool is effective; if it is calling out false alerts is it also missing real issues?
Can it occur if the battery is weak or needs replacement? My 41Wh battery in inspiron 15 3530 laptop suddenly weakened and holds charge only for a short time (~1 hr). I am seeing the battery warning and the pcie driver error during dell diagnostics/support assist etc.
Battery (original) lasted almost exactly 3 years :-(
My latitude e6410 (purchased refurbished) acquired in 2004/5 is still chugging along nicely (though slower). Have changed its replaceable battery only 3 times in past 20 years despite heavy use!
They don't make laptops (or pretty much anything) these days like they (not just Dell!) used to <sigh>
@anne_droid I agree! But with newer integrated batteries it is a good idea to check for any swelling etc in the unreplaced battery. Newer Dells do not seem to come with the older option where one could use the laptop plugged in but without charging the battery. If chemical degradation is continuing in a weakened battery it can pose a fire hazard if powered/charged as would happen when cable is plugged in without the cut-off option available. Older laptops (even all DELLs) with removable batteries (good old days) even allowed laptops to run without battery in place and powered by mains power cable. Now, probably NOT!
@DELL-Nat M Got Code DW0 this AM, checked Device Manager, and found "Unknown USB Device" (Device Descriptor Request Failed). How can this be fixed? Thank you very much.
Just now changed the 41 Wh battery on Inspiron 15 (3530) 2023 build.
More or less doable with proper tools and CARE, of course! If following random Youtube videos, please be prepared for some surprises. Particularly when removing and replacing the battery to motherboard cable. Unlike earlier dell and other laptops in my experience, the connections on inspiron need a bit more care and tend to be tight so jiggle with care! Well organized unit though, seems easy to add HD, swap memory, SSD, unscrew and put together the screws back, etc. Very neat and spacious layout!
Might be a good idea to change the battery cable after 2-3 swaps because routing the cable and inserting back in the new battery could be a bit hard on the wires. I wish Dell sold the batteries with the cable installed (battery end) because it is kind of fragile and should be sitting properly for good connection.
DELL-Nat M
Community Manager
•
3805 Posts
•
21481 Points
14
0
Posted September 15th, 2026 20:14
Hi @norfolkboyf1e8bb
The PCI Status Test: DW-0 DriverError warning is generally related to a device driver communication issue detected during the scan and does not typically indicate a hardware failure.
We recommend checking Device Manager for any devices showing a warning icon (yellow exclamation mark). If any are found, update or reinstall the affected driver, restart the system, and then rerun the SupportAssist Hardware Scan.
If no driver issues are present and the warning continues to appear, this may be a known false-positive result that can occur even when the system hardware is functioning normally.
Our engineering team has identified this behavior and is working on improvements for a future SupportAssist release.
#IWork4Dell