
Solved!
Go to SolutionClosed
M
MarkMessinger
1 Rookie
•
20 Posts
2
136931
August 7th, 2020 11:00
WD19TB "Your dock fan has failed." But, actually, it seems to be functioning fine
My XPS13 9300 is connected to a Dell WD19TB dock. All BIOS and dock firmware updates are current.
Oftentimes, when I boot the laptop, before it boots into Windows a diagnostic displays an error reading, "Your dock fan has failed. You may experience reduced performance until your dock is serviced."
But the dock fan appears to be operating fine. I can hear it, from time to time. And I experience no reduced performance.
This suggests the error message is, itself, in error.
Getting past the darned message really slows booting up the XPS13, though.
Has anyone else experienced this here and have you found a resolution?
This fellow over in the Vostro community posted a nice screenshot. But he's found no resolution, either.
32 people also have this problem
Responses (24)
Solutions (0)
MaikSchaef
1 Rookie
•
1 Message
66803
2
Posted January 14th, 2021 06:00
Unplugging the docking station from USBC and power supply for 1-2 minutes solved the issue for me.
JimBoDaDude
1 Rookie
•
2 Posts
41452
2
Posted November 14th, 2021 09:00
After almost a year of having this issue, the answer was simple.
Along with this error message and the dock fan running on high until turned off/on, I also had an issue with my external monitors flickering when the laptop lid was closed.
Yesterday, instead of receiving the boot up error message about the dock fan I had a different error message. The new error message said the laptop was being underpowered and may drain the battery. Ding ding ding. I was powering my laptop and SSD from the docking station and running two display port monitors.So, I connected the provided AC power adapter to the laptop. Lo and behold, my screens no longer flicker when laptop lid closed AND the dock fan is not running at high speed all of the time now. Additionally, I plugged my laptop into a separate outlet.
YEAH!!!!!
crabtreecj728
1 Message
67599
1
Posted December 7th, 2020 09:00
Just curious if anyone has found a solution for the problem? I had this issue a few months ago on a customers laptop and a bios update fixed the issue, or so I thought. Now the customer is complaining of the same issue. Just wondering if anyone has come across a fix.
Thanks!
Architekture
1 Rookie
•
2 Posts
67809
0
Posted December 9th, 2020 06:00
Me too. WD19TB with a Dell Precision, 3 Monitors, Video Camera, SSD drive. Its a very important fan. When it fails I’m dead in the water and working off an ipad.
Architekture
1 Rookie
•
2 Posts
66221
1
Posted January 27th, 2021 08:00
Same thing. The WD19TB dock is a key piece of my setup. I have to unplug the dock from power and computer then hold down the dock power switch for a minute. It seems to work. Why do I have to do this? Is there something else I could do to prevent it from happening in the first place?
MarkMessinger
1 Rookie
•
20 Posts
66111
0
Posted January 29th, 2021 06:00
Dell has agreed to replace my WD19TB dock.
For a long time, they resisted agreeing there was a problem with the dock. At one point the dock was being used by someone else who encountered the same problems. Eventually, Dell relented and sent me a refurbished unit as a replacement.
However, in the interim, I purchased a different dock. The CalDigit USB-C Pro dock is fanless and it has worked without a problem with my Dell XPS13 9300.
Personally, I suspect there could have been a problem with how this dock was monitoring its temperature. I often found its fan - I think there are at least five speeds available to the fan - running at its highest speed. But the temperature of the air being vented out of it was definitely not hot. Or even warm. My home office is kept cool (65F - 66F).
I realize this is not a great resolution, so far as this thread is concerned; I cannot report on the performance of the replacement WD19TB. I eventually chose to sell it and I've received no complaints from the purchaser.
- I've had a similar story. My dock, however, didn't seem to have temperature/fan issues, but was consistently dropping monitor connections. I got a new unit a couple days ago and spent a full day working with it yesterday. I had no dropped connection issues, so that's good. But I also had this phenomenon that you described: the fan is not working quietly, but rather has these rare insane bursts at full speeds (when it is not even needed, as the unit is barely warm). Now this makes me concerned that I will have more issues in the future. Good job getting rid of your unit!

DELL-Nat M
Community Manager
•
3805 Posts
•
21481 Points
0
0
Posted March 26th, 2024 14:08
If you’ve recently encountered this issue, Dell strongly recommends performing Dock reset followed by updating your Windows Operating System and Dell drivers.
Dock Reset Procedure:
Windows Operating System and Dell driver updates:
(edited)
#IWork4Dell