UNSOLVED

VAer

updated

5 years ago

V

VAer

2 Intern

•

86 Posts

2

8360

April 8th, 2022 05:00

Very disappointed with new XPS 8940

I just received it 5 days ago, now it has crashed 2 times(suddenly monitors turned black and lost every thing, PC sounds like turning down automatically, but light is on) and 1 window frozen, I had to forcefully press power button to shut down PC during those three incidents, then reboot it. 

I bought it mainly for stock trading, I am somewhat active trader. Very unreliable desktop, very disappointed, I cannot image if it crashes during trading hours. The crash this morning was around 8am, before stock market opens. During that time, I was only browsing some webpage, very light task.

Contacted customer support once, during the remote test, no hardware issue was found. But it just crashed again this morning. It is just unreliable, worse than my previous old Dell Precision T3500 (cheap, way out of date, but it almost never crashed during 7 years).

Is it hardware issue or window 11 issue? Is there a way to downgrade to Window 10? Window 11 may not be fully ready, especially taskbar (no ungrouping feature, no text label). I don't really want to be early user of window 11, I can upgrade to window 11 in 2 or 3 years.

...And RTX3070 loud fan noise, annoying.

Thanks.

 

XPS8940.jpg

  • ejn63

    12 Elder

    •

    31844 Posts

    •

    156262 Points

    1852

    0

    Posted April 8th, 2022 05:00

    If it crashed with a blue/black screen, run a utility like Who Crashed (Resplendence software) to see what the cause was.

    While you can move to Windows 10, you will then lose all software support -- if any hardware errors arise, Dell will insist you reload windows 11, so consider making a system image of the factory configuration or installing a new SSD and keeping the original as a backup.

     

  • VAer

    2 Intern

    •

    86 Posts

    1851

    0

    Posted April 8th, 2022 05:00

    Black screen, it is more like shutting down PC.

  • ispalten

    7 Practitioner

    •

    2650 Posts

    •

    9771 Points

    1840

    0

    Posted April 8th, 2022 07:00

    @VAer 


    @VAer wrote:

    I just received it 5 days ago, now it has crashed 2 times(suddenly monitors turned black and lost every thing, PC sounds like turning down automatically, but light is on) and 1 window frozen, I had to forcefully press power button to shut down PC during those three incidents, then reboot it. 

     


    It sounds like you have 2 Monitor's?

    If so, it also sound like the PC Lock-up many of us are experiencing?

    We get a Lock-up, nothing showing in terms of errors in the Event Viewer or the Reliability Monitor, other than Error 41 (PC powered off and not shutdown).

    ALL have an RTX video card. When disabling the card and used the HD video on the Chipset it never happens.

    Determined to be a problem within the BIOS, version 2.4. Rolling back to V 2.3 solves the problem.

    Suspect this is your issue as well from your description.

  • VAer

    2 Intern

    •

    86 Posts

    1839

    0

    Posted April 8th, 2022 07:00

    First, thanks for providing the solution.

    Yes, two monitors. I don't know what error and where to find error. How to roll back to BIOS V2.3? I don't know much for PC, I think it was shipped out with V2.4, and I did not upgrade.

    Thanks.

  • ispalten

    7 Practitioner

    •

    2650 Posts

    •

    9771 Points

    1817

    0

    Posted April 8th, 2022 08:00

    Well, easy to do, that is Rollback and stop V2.4 from being installed again.

    See this link, https://www.dell.com/community/XPS-Desktops/XPS-8940-system-hanging/m-p/8163634#M69871 as @trebor68 detailed the steps. I didn't do #3, not really needed to be done.

    Should solve it for you.

  • VAer

    2 Intern

    •

    86 Posts

    1831

    0

    Posted April 8th, 2022 08:00

    Passed edit time frame, and I would like to add something:

    If it is rolled back to V2.3, what if Dell keeps reminding upgrading to new BIOS? How to disable BIOS update? In the future, is it possible that new BIOS issue will be solved, or should I stay with V2.3 forever?

  • VAer

    2 Intern

    •

    86 Posts

    1790

    0

    Posted April 8th, 2022 15:00

    Thanks for the link. I have just done all three steps.

    Now I will watch it for next two weeks, hopefully it will not crash again.

  • VAer

    2 Intern

    •

    86 Posts

    1768

    0

    Posted April 8th, 2022 19:00

    @ispalten  @trebor68 It has been only a few hours since rolling back to V2.3, it just crashed for the third time.

  • ispalten

    7 Practitioner

    •

    2650 Posts

    •

    9771 Points

    963

    0

    Posted April 9th, 2022 05:00

    You are using 2 monitors, right?

    Everyone else is using only one connected to the Discrete RTX card. I assume that you are using both that card and the HD750 motherboard connector? Although it is possible to use just the Discrete RTX card.

    So I am thinking besides the BIOS you might be pulling too much power or overheating the CPU?

    There are programs that will show you that.CPUID's HWMonitor (https://www.cpuid.com/softwares/hwmonitor.html ) will so that. My CPU is sitting near the Min. temp (after just booting, 110 F vs min. 102F, max is 158F). My RTX2060's temps are GPU 92F Max (so far) and a Hot Spot of 113F. Another one would be HWINFO (https://www.hwinfo.com/ ).

    One test I would do, more to rule out the dual monitor as the problem more than anything else is use just one monitor. Go into BIOS and turn off DUAL DISPLAY (forgot what that option was?) and in also in Device Manager DISABLE the HD750. When booting to BIOS verify that you are NOT on V2.4 (or run MSINFO32 which also shows you the BIOS version.

    Running a single monitor off the RTX card should not lockup with BIOS 2.3 installed. It will with BIOS 2.4 installed though, but it is random when.

    If you keep either of the HW programs open on the display that doesn't go black, and on the CPU or GPU page showing, then when you do lock-up, you'd see the temps when you do. That can rule out heat as the problem.

    If nothing more, you'll have some data, along with the various links to freezing/lock-ups here to give Dell Support.

  • ispalten

    7 Practitioner

    •

    2650 Posts

    •

    9771 Points

    1492

    0

    Posted April 9th, 2022 06:00


    @VAer wrote:

    First, thanks for providing the solution.

    Yes, two monitors. I don't know what error and where to find error.



    For the ERRORS, use EVENT VIEWER (run eventvwr.msc in a CMD prompt) and click on EVENT VIEWER (LOCAL) and look at the 'Last Hour' column. You WILL see a lot of them, normal, but focus on CRITICAL first. Have and, open the + and see what they are? If you see an EVENT ID 41, that is because you rebooted after and improper shutdown. Normal. Others, well, they could be a problem.

    Mine looks like this:

    ispalten_0-1649509437421.png

     

    Another would be the RELIABILITY MONITOR, search for on the Start Menu Relability and select VIEW RELIABILITY HISTORY. Each day you might see some RED, BLUE, or YELLOW icons on it. Click on that day and you'd see what each is. Might give you a clue, but in ALL cases, people here have found NOTHING matching the time of the freeze/lock-up. Maybe you'd have better luck.