Hi there. I have a Dimension E520. Mainly stock, only upgraded proc to an E6320. Lately I have tried to boot to the WinXP cd. When I do and it loads all the drivers and files, I get a BSOD. The error code is
STOP:0X0000007B. I looked it up on Microsoft's KB and it came up with a variety of possible issues. I thought it could be the drive controller and tried to load the scsi drivers but that did not work.
I also tried to boot with no hard drive connected and also with a brand new hard drive. I have also tried other winxp cd's and get the same issue. Does anybody know what could be the problem?
First of all did your system come with XP or Vista? I just am wondering if you are using media from Dell for the xp install or Retail copies..
I am going to assume you are using retail copies to this reply
You problem is related more than likely to the fact your XP cd does not contain the Sata drivers for your system for your hard drive.
When you are loading you XP CD it loads drivers in the beginning for things like SCSI and other various things. AT that time you need to insert your Floppy (yes USB won't work as back when XP was created there was no such thing as a USB key) and hit F6 to get the load drivers screen. You would load the drivers for sata there..
for the E520 you can locate the drivers via this link
Alternatively you can use the info I have posted on the community forum on sata drivers and using a free program called Nlite to "slipstream" the drivers and creating a new OS Cd with the drivers built in. (which may be a better solution as most machines now do not have a floppy drive)
Your system as far as I can remember does not have the ability to run in combination mode in the bios under sata drive operation I think you have only raid on or off there but you can check that as well.
Good luck and let us know what you were able to do
My E520 does not have a RADI configuration, so it is useless to have SATA ON, the best (or easy) way to work it is to disable SATA on the SATA Operation on BIOS. Now if you're using a RAID configuration the solution posted before will be the best for you...
Modemqueen
29 Posts
147
0
Posted January 4th, 2008 14:00