UNSOLVED

veryoldman

updated

22 years ago

0

5466

November 15th, 2004 22:00

Since SP2 install often failure to come out of hibernation

Since I installed SP2 on my Dimension 4100 I often have failures to come out of hibernation. Indications are often that the Nvidia driver is at fault, but 2 installs of new drivers and still the problem. Revovery is sometimes automatic and sometimes I must force recovery, but key board is dead. Sometimes with relativly clean dekstop it comes out of hibernation, but two times in three it fails. Any hints?
  • Flooby

    2 Intern

    •

    3031 Posts

    377

    0

    Posted November 16th, 2004 13:00



    @veryoldman wrote:
    Since I installed SP2 on my Dimension 4100 I often have failures to come out of hibernation.  Any hints?


    Yes.  Since Hibernation was designed for use as a power saving tool on portable (i.e., battery powered) systems, and since it almost invariably fails on desktop systems as a result, lose the Hibernation, set the hard disk and monitor to turn off whenever you desire via Power Options, and save yourself a whole lot of grief.  It's been this way since way before Windows XP, and it's more than likely never going to change.  Standby and Hibernate just don't work worth a hoot on a lot of desktop systems.
  • tbracer44

    43 Posts

    377

    0

    Posted November 16th, 2004 16:00

    Hibernate doesn't work a hoot on my Inspiron 9100 either. Standby works when I close the lid but not when I set it using the Turn off the computer sequence. I gave up and did the same thing you suggested Flooby, and just set it to turn off the monitor and hard drives after so long. Some things are just not important enough to spend all this time on. I have no idea if this is a problem with sp2 because i didn't try it before I installed it. I just remember it being a pain on my old Dimension 4100 with Windows Me and giving up on it (and so many other things with Me).
  • Flooby

    2 Intern

    •

    3031 Posts

    377

    0

    Posted November 16th, 2004 20:00



    veryoldman wrote: Maybe I am just lucky on the other machines...Clue?

    As a search of this forum for "Hibernate" and "desktop" will more than likely confirm many times over, I'd say you've answered your own question.
  • 377

    0

    Posted November 16th, 2004 20:00

    I have two laptops and two desktops all running XP SP2. All hibernate and return without problems, except one desktop the Dimension 4100, and that worked fine until SP2.  Maybe I am just lucky on the other machines, but none of them have the NVIDIA driver like the one that fails. Clue? I've reinstalled the latest driver twice, but still have the problem.