UNSOLVED

hxman101

updated

15 years ago

H

hxman101

1 Rookie

•

31 Posts

0

2981

December 17th, 2011 07:00

VNX5100 and Direct Attach LUN Masking

Hello,

I am new to the VNX family of storage arrays and was wondering about LUN masking at the array level as are direct attaching the 5100 to a Cisco UCS?

Is it possible and does anyone have a few recommended best practices and/or sample architectures?

Thanks....

  • dynamox

    11 Legend

    •

    20419 Posts

    •

    87439 Points

    599

    0

    Posted December 17th, 2011 07:00

    how are you connecting to UCS ? iSCSI , FC , FCOE ?

  • hxman101

    1 Rookie

    •

    31 Posts

    599

    0

    Posted December 17th, 2011 08:00

    Oh ya, FC....

  • dynamox

    11 Legend

    •

    20419 Posts

    •

    87439 Points

    599

    0

    Posted December 17th, 2011 13:00

    blade server ? any fabric extenders ?

  • hxman101

    1 Rookie

    •

    31 Posts

    599

    0

    Posted December 17th, 2011 14:00

    B200 blades

    6248up Interconnects (2)

    2208XP FEX (2)

    M81KR VIC card (1 per blade)

  • dynamox

    11 Legend

    •

    20419 Posts

    •

    87439 Points

    599

    0

    Posted December 17th, 2011 14:00

    what kind of ports on your VNX , FC and FCOE ?

  • hxman101

    1 Rookie

    •

    31 Posts

    599

    0

    Posted December 17th, 2011 14:00

    FC.....

  • dynamox

    11 Legend

    •

    20419 Posts

    •

    87439 Points

    599

    1

    Posted December 17th, 2011 16:00

    so you will need FC transceivers, you will also need to put the switch into "switched" mode where it behaves as a regular fiber channel switch. By default 6100 used to come in NPV only mode where the switch gets uplinked to another fiber channel switch (NPIV core), i assume 6200 is the same thing. I also remember that 6100 had very "basic" zoning. You would put ports of your array and host into the same VSAN and every host in that VSAN would connect to every array port.  Not a big deal because you control your masking from Unisphere side, you will get to define which WWN can see what LUNs.

  • Taryel Kazimov

    1 Rookie

    •

    9 Posts

    599

    0

    Posted August 15th, 2015 08:00

    Hi how to define "WWN can see that LUNs"? There is any way without creating Storage Group? Or create storage group but hide some LUN inside SG from Servers?

  • dynamox

    11 Legend

    •

    20419 Posts

    •

    87439 Points

    599

    0

    Posted August 15th, 2015 11:00

    yes, masking is done by adding registered hosts to a storage group. If you need to share some LUNs between hosts but nother others you can create multiple storage groups and add "shared" LUNs to multiple SG.