UNSOLVED

Edubra

updated

8 years ago

E

Edubra

1 Rookie

•

7 Posts

2

60455

April 2nd, 2013 14:00

VNX 5300 - SNMP MIB and Traps eventID and EventText

Hi folks,

            I need your help with the following subject, I already ask this to EMC’s local support but I don't get any answer from them.

We are installing 2(two) VNX5300 and our customer would like to monitor the VNX system using his own monitoring system through SNMP. Our customer is a big Telecom Player in Brazil and his monitoring system automatically make a call for his technical team in case of error or faults in the systems.

For provide this integration our customer should receive

  1. 1)      The VNX5300 Mib. Do you have this Mib? Could you please send me the VNX5300’s MIB?

  1. 2)      The list of each eventID and eventText for the traps send from VNX5300 system. Do you have this documentation? We couldn’t find this list in any documentation. EMC’s local support team said me that this list is not documented, I can’t believe this, I can’t believe that a company as EMC doesn’t have this documentation.

Do you have this list? Could you please send me this documentation with the list of EventIDs and EvenText for each EvenID?

  1. 3)      For each trap we need to know the trap clear. Could you please send me this information?

I thank you in advance for any help that you can provide me, because I’m trying to get this information from EMC’s local support team since 5 month ago without success. This is unbelievable, because I get this information from HP Servers and Cisco Switch’s in less than 1 month.

Best Regards.

Eduardo Dubra

Technology Manager

ATS Advanced Technology System

  • Peter_EMC

    674 Posts

    16253

    1

    Posted May 29th, 2013 01:00

    The

    "Configuring Events and Notifications on VNX™ for File

    P/N 300-013-509 Rev 01"

    manual will answer your questions.

    It is part of the documentation, for your convenience, I have attached it

    1 Attachment

  • Edubra

    1 Rookie

    •

    7 Posts

    16243

    1

    Posted May 29th, 2013 05:00

    Hi Peter,

                thank you for your answer and help, we already have this manual but we can't find the information I mentioned in my original post in this manual.

    1. 1. The list of each eventID and eventText, etc  for the traps send from VNX5300 system.
    2. 2. For each trap we need to know the trap clear.

    To your better understanding about why we need this, we have to complete de attached excel file for our customer. We did this without problems for HP and Cisco, because they sent us the information to fill this excel, but we couldn’t do this with the information sent by EMC.



    Regards

    1 Attachment

  • Rainer_EMC

    6 Operator

    •

    8645 Posts

    16244

    0

    Posted May 29th, 2013 14:00

    Is this for a VNX block (SAN only) or a VNX Unified (NAS or NAS+SAN) system ?

    There is potentially SNMP on the data movers and on the storage processors.

  • umichklewis

    4 Apprentice

    •

    1190 Posts

    16243

    0

    Posted May 29th, 2013 14:00

    Peter is correct - If you use the Configuring Events and Notifications on VNX document, it tells you how to configure SNMP traps on the VNX.  One thing that confuses a lot of people:  the VNX MIB, by default, does not contain every trap!  This is because EMC allows you to customize the notification method for each event that occurs.  For example, I have my Celerra configured to send email for VirusChecker and filesystem events, then send SNMP traps for hardware events.

    If you download the MIB from the Celerra control station, you'll note that it has very few events defined, just event Facilities.  The difference?  You can configure your events on the Celerra to generate a trap with a unique Trap ID and a plain-text description that you create yourself.  This gives you a lot of flexibility to customize the messages you want to create.

    Does that help?

    Thanks!

    Karl

  • Edubra

    1 Rookie

    •

    7 Posts

    16230

    0

    Posted June 3rd, 2013 05:00

    Hi,

    thank you for your answer and help. To your better understanding about what we need following a better explanation, 

    Our platform will be installed in a critical telecom environment , for this kind of platforms our customer has his own monitoring system based on SNMP standards.

    All the systems of the platforms should be integrated with this monitoring system using SNMP Traps.

    The monitoring system interpret the SNMP TRAPS sent by the systems and determine(based in the information contained into the TRAP) when or not call to a Customer’s Team to attend this incident.

    To do this, the monitoring system has to interpret the information sent into the Trap. Also, once the incident is resolved the monitoring system has to interpret the clear event to close the incident.

    To execute this integration,  we have to complete de attached excel file for our customer. We did this without problems for HP and Cisco, because they sent us the information in order to complete this worksheet, but we couldn’t do this with the information sent by EMC.

    Regards.

    1 Attachment

  • 14386

    1

    Posted June 3rd, 2013 07:00

    emc171987 - Refer this article to download MIB file.

  • Rainer_EMC

    6 Operator

    •

    8645 Posts

    16230

    0

    Posted June 3rd, 2013 08:00

    you still havent answered whether this is a SAN or NAS system

  • Edubra

    1 Rookie

    •

    7 Posts

    16231

    0

    Posted June 3rd, 2013 09:00

    Hi Rainer,

                    It's a SAN solution EMC Block.

    This is the storage

    EMC VNX 5300 Block Only

    Redundant Storages Controller

    08GB  Cache per storage controller (16GB Total)

    - 45 HDD SAS 600GB 6Gbps 15Krpm

    - 09 HDD NLSAS 2TB 6Gbps 7200rpm

    - 02 HDD FLASH 100GB

    Host Conectivity:

    04  FC ports 8Gbps per controller (Total 08 ports)

    04 iSCSI ports 1Gbps per controller (Total 08 ports)

    02 iSCSI ports 10Gbps (SFP) per controller (Total 04 ports)

    Management Software Unisphere for BLOCK

    LocalProtection Suite

    PowerPath Licenses

    - 04  Servers Red Hat Enterprise Linux 5.5., 02 physical processors per server.

    Regards.

  • Edubra

    1 Rookie

    •

    7 Posts

    16230

    0

    Posted June 3rd, 2013 09:00

    Hi Rainer,

                    It's a SAN solution EMC Block.

    This is the storage

    EMC VNX 5300 Block Only

    Redundant Storages Controller

    08GB  Cache per storage controller (16GB Total)

    - 45 HDD SAS 600GB 6Gbps 15Krpm

    - 09 HDD NLSAS 2TB 6Gbps 7200rpm

    - 02 HDD FLASH 100GB

    Host Conectivity:

    04  FC ports 8Gbps per controller (Total 08 ports)

    04 iSCSI ports 1Gbps per controller (Total 08 ports)

    02 iSCSI ports 10Gbps (SFP) per controller (Total 04 ports)

    Management Software Unisphere for BLOCK

    LocalProtection Suite

    PowerPath Licenses

    - 04  Servers Red Hat Enterprise Linux 5.5., 02 physical processors per server.

    Regards.

  • Rainer_EMC

    6 Operator

    •

    8645 Posts

    4725

    0

    Posted June 3rd, 2013 10:00

    You you have ESRS conifgured ?