UNSOLVED

bhargav_tarigop

updated

14 years ago

B

bhargav_tarigop

1 Rookie

•

17 Posts

0

2597

August 21st, 2012 08:00

Unisphere Notifications

Hello All,

We have configured the notifications for one of our VNX server and we are able to get the events as mail notifications. Below is one of the example of it.

------------------------------------------------------------------------------------------------------------------------------

Time Stamp 08/21/12 05:28:18 Event Number 903 ExtCode1 00 ExtCode2 00 Severity Error

Host < >  Storage Array < > SPB  Device Bus 2 Enclosure 0 Power B

Description Fan Shutdown/Removed

-----------------------------------------------------------------------------------------------------------------------------

I am wondering about the possibility of adding IP address of the storage array in this notifications. Can any one tell me whether it is possible to add the IP address or not

If yes, Can you help me on the configurations

Thanks,

Bhargav

  • bhargav_tarigop

    1 Rookie

    •

    17 Posts

    547

    0

    Posted August 21st, 2012 09:00

    We normally get notification with the Storage Array Serial. The current process is, we are checking for the ip for this serial number in our inventory. Using that IP we launch the Unisphere.

    This is not specific any alert.. It would be great if we get the IP address of the Storage Array along with Serial

  • Vipin VK

    2 Intern

    •

    812 Posts

    547

    0

    Posted August 21st, 2012 09:00

    You need just an identification from which storage (in case if you have multiple storage in your env) the alert is coming or you need SP IP address itself ?

  • 547

    0

    Posted August 21st, 2012 15:00

    It appears you'll need to create a custom template with the IP addresses hard coded into the message formatting since there is not a build in variable name for the IP Addresses.

    The help feature in Unisphere will guide you through the process.  But in general,  start here

    System > Monitoring and Alerts > Notifications for Block > Configure > Create Template

    When you get to this part hard code the IP addresses for SPA and SPB into the message box area.  You'll need to have unique templates for each storage array you monitor.