UNSOLVED

jamesdunbar

updated

14 years ago

J

jamesdunbar

15 Posts

0

2036

April 12th, 2013 15:00

Can NL-SAS drives be used for VNX vault drives?

Hi everyone, quick question: It looks like VNX systems can now be ordered with just NL-SAS drives (no SAS or EFD).  The old rule for FLARE 31 and below was that only FC or SAS drives could be used for the vault.  Can NL-SAS drives now be used for vault storage?

Thanks for your help!

  • greysave

    4 Posts

    980

    0

    Posted April 12th, 2013 15:00

    That would be a terrible waste of space.  I thought all VNXs came with 600GB Vault drives by default.  What documentation do you see that changed at?

    On new VNXs that I have installed with all NL-SAS disks, there were still SAS Vault drives.

  • dynamox

    11 Legend

    •

    20419 Posts

    •

    87439 Points

    980

    0

    Posted April 12th, 2013 22:00

    yes ( i am not sure if all models support that), here is VNX 5300 with NL-SAS drives

    4-13-2013 1-04-28 AM.jpg

  • greysave

    4 Posts

    980

    0

    Posted April 13th, 2013 13:00

    Ah thank you.

  • jamesdunbar

    15 Posts

    980

    0

    Posted April 15th, 2013 06:00

    Thanks Dynamox, appreciate the info.  Was pretty sure this was the case, but you never want to assume anything!

  • christopher_ime

    6 Operator

    •

    1962 Posts

    980

    0

    Posted April 19th, 2013 17:00

    jamesdunbar,

    You didn't mention what model of VNX you have, but in regards to what drives are supported for vault drives, you will want to refer to the "Storage Systems Disk and OE Matrix" for your model (search for it on support.emc.com by name).  With the VNX the content is separated as follows:

    EMC VNX5100 and VNX5300 Series Storage Systems Disk and OE Matrix

    EMC VNX5500, VNX5700 and VNX7500 Series Storage Systems Disk and OE Matrix

    If you skip to the charts: "Usable disk space" you will see reference to each of the drives and a note whether or not it is supported (as well as the usuable capacity). 


    Specific to your question, you will see that the NL-SAS drives (3TB, 2TB, and 1TB) are only supported for the VNX 5100, 5300, and VNX 5500.  They are unsupported for the VNX 5700 and VNX 7500

    vault1.png

    vault2.png

  • jamesdunbar

    15 Posts

    980

    0

    Posted April 23rd, 2013 08:00

    Great information Christopher. This was the info I was looking for. Appreciate your sending the links and updates.

    Thanks very much.