Beware Dell Venue Pro 11 Tablet dock A03 firmware destroys video output on
Black Tablet dock 1
A word of warning:-
I updated a Dell tablet dock 1 (it turns out there a two versions, version 1 black base and version 2, grey base) from A02 0.41.19 f/w to A03 0.41.23 . This then broke the docks ability to output to either HDMI or Display Port (both worked perfectly before the update). Dell refused to replace the dock as it was out of warranty ( I bought a 3 year warranty with the tablet, but it doesn't apply to the dock). I was annoyed as we have spent hundreds of thousands of pounds with Dell over the past 10 years. So I admitted defeat and bought and new dock, initially it worked fine so I thought I would apply the A03 firmware. It installed successfully and then as before the display outputs on the dock failed to work. According to the install notes the new firmware isn't required but can install without causing any problems
"Dell Tablet Dock FW Update Tool
This package provides Dell Tablet Dock firmware for use with Dell Venue 11 Pro 7130/7139/7140 and Latitude 13 7000 Series 2-in-1 notebooks that are running Windows 7 or Windows 8.1 Operating Systems.
Fixes & Enhancements
A03 is to restore Tablet Dock II (has the gray-colored tablet support) to initial factory firmware if needed.
NOTE: A03 does not fix any issues for Tablet Dock I (black-colored tablet support), but does provide Tablet Dock I the same functionality as A02 (41.19) if applied to Tablet Dock I. Tablet Dock I does not need this update."
There is most definitely a problem installing this firmware on a black base tablet dock 1 and there is no way to revert it back the previous version. I don't think it has been tested properly and it should say under no circumstances should this be installed on a black tablet 1 dock running firmware 0.41.19. as it will brick any video output.
We've done extensive testing on both of these firmware versions internally and haven't seen this problem. 41.19 should be fine on the black dock. If you have the silver dock, it comes with 41.23 which is required for DP++ and Gigabit Ethernet support. Upgrading the black dock to 41.23 should be fine as well but it will not enable any additional functionality above and beyond 41.19. You should not attempt to downgrade the silver dock to 41.19.
I suspect perhaps power was lost or something else occurred while the upgrade was taking place? Did you notice anything unusual? What happens when you try to update the firmware again on the black dock?
Having said what I did about the PSU, the previous black dock that also bricked was running with the originally supplied 45W PSU so I don't think this is the reason.
I am now on my second black dock ( I had 2 previously A00 version with the non updateable firmware) and tried updating as before from the f/w version it shipped with to A03. There was no indication that it hadn't been successful and no power was lost or anything else noticeable. The only thing I can say is I have updated 2 black docks to A03 and neither will now output video to HDMI or display port whereas before the update they worked fine. USB and Lan ports all continue to work fine.
If I try and run the update again it says, error:Please unplug power connector form the dell dock for 15 seconds, then plug power connector back into the dell desktop dock and try again.
I have tried this multiple times with no success.
Is there a part number for the silver dock as when I ordered a new one I expected to get the newest model with gigabit LAN and DP++
I have noticed the new dock shipped with a 65W PSU and I carried on using the previously supplied 45W PSU, is this a possible reason for the problem?
I have just received the 4th replacement dock (silver dock2) and plugged in my tablet and no HDMI or DP output on either of my 2 Dell P2214H monitors. I have taken the tablet and tried in another dock and the HDMI to DVI screen displays properly. I have been using both the DP and HDMI outputs successfully for the last year but since I updated the firmware on the tablet 1 dock have been unable to output to either screen and both replacements have exhibited exactly the same issue (the first replacement did work out of the box but then failed after the firmware update, even though it applied successfully). I can use the tablets mini HDMI output successfully though. I have tried downgrading the tablet firmware to A13 from A15. This has also made no difference.
I tried to update the firmware on the Silver dock when connected via the tablets mini HDMI port and it says Error: Please unplug power connector from the Dell Desktop Dock for 15 seconds, then plug power connector back in to the Dell Desktop Dock and try again.
If I try the same thing with both my DP and HDMI connected to the dock I get this error:-
Tablet cannot detect external monitor through Dell Desktop dock as required. Please ensure.
1. Tablet is docked to the Dell Desktop dock
2 External display is powered on and attached to the Dell Desktop Dock HDMI out or Displayport out
Then press retry.
At no point has the update progressed beyond either of these errors, nor was it interrupted by the tablet being undocked, going into standby or the dock being powered down.
My external monitor will work when connected to the mini HDMI connector so I know the cable is good and the monitor is fine.
I have spent multiple hours on the phone to tech support and I have no resolution to this issue and am building up a collection dead Dell docks as they don't want to collect them either! This is really frustrating as if I didn't bother updating the firmware in the beginning this whole episode wouldn't have occurred. Please beware upgrading the firmware on these docks is a risky business!
Same happened to me. Updated firmware on the older black dock to A04 yesterday to see if it would fix the monitor sleep issue I've been having...it killed my DisplayPort and HDMI connections. They worked fine prior as long as my monitors didn't go to sleep. I have a second dock and it works fine. First dock is still under warranty.
DELL-Brian B
4 Apprentice
•
828 Posts
1713
0
Posted May 18th, 2015 13:00
We've done extensive testing on both of these firmware versions internally and haven't seen this problem. 41.19 should be fine on the black dock. If you have the silver dock, it comes with 41.23 which is required for DP++ and Gigabit Ethernet support. Upgrading the black dock to 41.23 should be fine as well but it will not enable any additional functionality above and beyond 41.19. You should not attempt to downgrade the silver dock to 41.19.
I suspect perhaps power was lost or something else occurred while the upgrade was taking place? Did you notice anything unusual? What happens when you try to update the firmware again on the black dock?