UNSOLVED

rstickalnd

updated

13 years ago

R

rstickalnd

20 Posts

0

904

November 18th, 2013 07:00

vmax10k Vplex SYMCLI

we just installed a new vmax 10k behind a vplex and have to redo our host connection for our 10K's to work with solutions enabler or smi-s host.  what is the the best solution a) create gate keeper and map directly  from the host  to the san skipping the vplex or b) include the vplex as well?

  • christopher_ime

    6 Operator

    •

    1962 Posts

    433

    0

    Posted November 21st, 2013 23:00

    Please consider moving this question as-is (no need to recreate) to the proper forum for maximum visibility.  Questions written to the users' own "Discussions" space don't get the same amount of attention and questions can go unanswered for a long time.

    You can do so by selecting "Move" under ACTIONS along the upper-right.  Then search for and select: "Symmetrix Support Forum".

    Symmetrix Support Forum

    VPLEX

  • 433

    0

    Posted January 23rd, 2014 11:00

    Hello rstickalnd,

    So this is the first time storage is being provisioned from the Symmetrix VMAX storage to the VPLEX. Assuming that the VPLEX has been zoned to front-end ports of the Symmetrix VMAX storage, all Symmetrix actions should be executed

    from the management host (that has Solutions Enabler SYMCLI installed) connected through gatekeepers to the Symmetrix, or using a Symmetrix Management Console client.

    i.e If you need to manage the VMAX behind the VPLEX, create gatekeepers and map,mask them to the management host, skipping the VPLEX.

    Thanks ..