UNSOLVED

k_williamson

updated

12 years ago

1

7677

April 8th, 2015 08:00

VMAX 10K Health Check fails on Environmentals Test

I have a VMAX10K that always fails the Environmentals Test part of the Health Check.  I would like to know what the Environmentals Test is checking for.  All of the other parts pass green, I just want to be able to login into Unisphere for VMAX and see that part green instead of ignoring red.  I have ran a symcli command(see below) to check the events, but all I saw was where a drive failed last year.

>symevent list -v -all

Symmetrix ID: XXXXXXXXXXXXXXX

Time Zone   : Central Daylight Time

Event at Thu Jan 30 09:42:03 2014:

   Reporting Director : DF-2B

   Source             : Symmetrix

   Category           : Disk

   Severity           : Error

   Numeric Code       : 0x0078

   Event Code Symbol  : MIRROR_WD

   Description        : A Symmetrix device has a member or a mirror that is Write Disabled

any thoughts?

  • umichklewis

    4 Apprentice

    •

    1190 Posts

    3470

    0

    Posted April 8th, 2015 10:00

    I am curious as well, as I have a new-out-of-the-box VMAX 10K with the issue:

    Clipboard.png

  • Ugin

    1 Rookie

    •

    122 Posts

    3470

    0

    Posted April 8th, 2015 23:00

    It will verify that internal environmental components status (power supplies, blowers, batteries, etc.) also verifies that the battery test reported no errors.

  • 3470

    0

    Posted April 9th, 2015 05:00

    How we know which one of the internal environmental components failed?

  • Ugin

    1 Rookie

    •

    122 Posts

    3470

    0

    Posted April 9th, 2015 08:00

    Dial home would have generated and PSE lab will look in to the issue.
    Also if the alerts have been configured then you will get notification.


    check if there any Service Request opened for this frame? Else contact the PSE lab for further analysis.

  • 3470

    0

    Posted April 13th, 2015 09:00

    We do have dial home configured, but we had drives failed and other issues before EMC would contact us.  I just opened a Service Request just to find out for sure what is going on.  What is the PSE lab?  I have ran the following command and things appear to be normal

    C:\Windows\system32>symcfg -sid XXX list -env_data

    Symmetrix ID               : XXXXX

    Timestamp of Status Data   : 04/13/2015 11:04:02

        System Bay

          Bay Name                             :    SB-1

          Number of Standby Power Supplies     :    4

          Number of Drive Enclosures           :    8

          Number of Enclosure Slots            :    1

          Number of MIBE Enclosures            :    0

          Summary Status of Contained Modules

            All Standby Power Supplies         :    Normal

            All Enclosures                     :    Normal

            All Link Control Cards             :    Normal

            All Power Supplies                 :    Normal

            All Enclosure Slots                :    Normal

            All Power Supplies                 :    Normal

            All Fans                           :    Normal

            All Management Modules             :    Normal

            All IO Module Carriers             :    Normal

            All Directors                      :    Normal

            All MIBE Enclosures                :    Normal

            All Power Supplies                 :    Normal

        Drive Bays

  • 3470

    0

    Posted April 13th, 2015 14:00

    PSE looked into the issue and noticed in the environmental test is reporting a missing cable for the light pipe assembly for the system bay.  We have our VMAX 10K installed in a 3rd party rack.  They also said there is not a way to stop the check on the symmetrix side.

    I submitted a SR to the Unisphere support group and we see how it goes.

    Karl,

    Is your VMAX in a 3rd party rack?

  • Ugin

    1 Rookie

    •

    122 Posts

    3470

    0

    Posted April 13th, 2015 23:00

    You meant to say that the system bay door LED issue?

  • 3470

    0

    Posted April 14th, 2015 06:00

    Very likely.   It is looking for something that is not there.

  • Ugin

    1 Rookie

    •

    122 Posts

    3477

    0

    Posted April 14th, 2015 23:00

    Exactly, because VMAX has installed on 3rd party rack as you said earlier.
    Can i have the EMC Service request number? which you opened against this issue.

    There is a workaround for this issue, local team can help you on this

  • umichklewis

    4 Apprentice

    •

    1190 Posts

    725

    0

    Posted April 15th, 2015 05:00

    No - our VMAX 10K is in a standard rack.  I've opened an SR as well, to have the fault isolated.