I would like to upgrade my 40GB h/d with a 60 or 80 GB
Hitachi TravelStar 7K60 series Hard drive. Has anyone accomplished the same feat or can someone let me know if the 7K60 is compatible with my 9100. Any recommendations?
Any 2.5 inch notebook hard drive can be used. As for the 7K60, it will work in your system. I have one installed in an I8000 and another in my I8600. Both are working just fine.
I upgraded my Inspiron 8200 internal hard drive to a 60 gig 7200 RPM drive. Now I would like to use my original 40 gig in the removeable media bay.
I bought a non-OEM 4169D ("C") model 2nd drive module on eBay. http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=6837350762
I followed your (great) installation instructions. The new hard drive module looks like my other original Dell floppy and CDRW modules, but those slide in easily and click in place. This one won't go all the way in - it hangs out about 1/2 inch.
Is it true that some of these modules go in very hard? I saw a moderator replay to a really old message in this forum that they go in hard. I think the pins on the back of the module are not lining up with the recepticle panel inside the bay, but because I cannot see inside it is hard to tell if that is the reason. Another possibility is that the pins on the module are simply thicker than those on internal jack (panel).
I do not want to force it and break the pin recepticle panel inside my laptop.
I suppose I could take my 8200 apart so I can see what is causing the problem, but I have never done so and would prefer to avoid that.
Bay Wolf
4438 Posts
124
0
Posted January 17th, 2006 02:00
Any 2.5 inch notebook hard drive can be used. As for the 7K60, it will work in your system. I have one installed in an I8000 and another in my I8600. Both are working just fine.